Oil Insulated Transformer Manufacturer & Supplier Serving Sihanoukville

Utility-Grade 10kV, 22kV & 35kV Medium Voltage Oil-Immersed Distribution & Pad-Mounted Transformers Engineered for Coastal Port Infrastructure, Special Economic Zones (SSEZ), and Tropical Marine Environments

Featured Power Equipment

Grid-Grade Oil Insulated Transformer Portfolio

Fully compliant with IEC 60076, IEEE C57, and Electricité du Cambodge (EDC) distribution standards. Every unit undergoes rigorous routine dielectric and thermal testing before dispatch.

S11 Three Phase Oil Immersed Distribution Transformer IEC 60076

S11 Three Phase 10kV-35kV Oil Immersed Transformer (100kVA - 630kVA)

  • Primary Voltage: 10kV / 15kV / 20kV / 35kV
  • Capacity Range: 100kVA - 630kVA
  • Vector Group: Dyn11 / Yyn0
  • Cooling Method: ONAN Hermetically Sealed
ZGS11 MV & HV Pad Mounted Three Phase Transformer ANSI / IEEE

ZGS11 75-2500kVA MV/HV Pad Mounted Three Phase Transformer

  • Primary Voltage: 10kV / 20kV / 35kV
  • Capacity Range: 75kVA - 2500kVA
  • Feature: Tamper-Proof Enclosure
  • Application: Commercial & Solar Parks
Industrial Pad Mounted Power Substation Transformer Heavy Industrial

MV/HV 6kV-35kV 3 Phase Pad Mounted Industrial Power Transformer

  • Primary Voltage: 6kV up to 35kV
  • Frequency: 50Hz / 60Hz Dual
  • Enclosure Rating: IP54 Outdoor Weatherproof
  • Insulation Fluid: High Flashpoint Mineral Oil
American Standard 13.8kV Pad Mount Transformer IEEE C57.12.34

American Standard 13.8kV 75-2500kVA Pad Mount Transformer

  • Voltage Rating: 13.8kV Primary / Low Voltage
  • Configuration: Loop Feed / Radial Feed
  • Protection: Bay-O-Net & Current Limiting Fuse
  • Certification: CE & IEEE Compliant
Compact Oil Type Pad Mounted Transformer for Renewable Generation Step-Up / Generation

75kVA-400kVA 3 Phase Oil Type Pad Mounted Power Transformer

  • Voltage Options: 10kV / 20kV / 35kV
  • Core Type: High Permeability CRGO Steel
  • Winding: 100% Electrolytic Copper/Aluminium
  • Tank Design: Hermetic Sealed Corrugated
S11 500kVA 22kV to 0.4kV Oil Immersed Distribution Transformer EDC Grid Standard

S11 500kVA 22kV/0.4kV Oil Immersed Distribution Transformer

  • Primary Voltage: 22kV (Standard Cambodian MV Grid)
  • Secondary Voltage: 400V / 230V
  • Loss Ratings: Super Low No-Load & Load Loss
  • Certification: CE Certified / IEC Standard
High Capacity S11 Three Phase Power Transformer Up to 50MVA

S11 Series 10kVA - 50,000kVA Heavy-Duty Power Distribution Transformer

  • Voltage Range: 10kV to 35kV Primary
  • Customization: OLTC / Off-Circuit Tap Changer
  • Bushing Type: Porcelain / Plug-in Elastomer
  • Protection: Buchholz Relay & Pressure Relief
33kV High Voltage Oil Immersed Industrial Power Transformer High Voltage Substation

IEEE Standard 33kV Oil Immersed Industrial Substation Transformer

  • Voltage Class: 33kV / 34.5kV Substation Step-Down
  • Tank Protection: C5-M Anti-Corrosion Marine Paint
  • Cooling System: ONAN / ONAF Radiator Assembly
  • Standards: IEEE C57.12.00 & IEC 60076
20+
Years Engineering Expertise
500kV
Max Voltage Capability
6,847 m²
TÜV Verified Plant
100%
Routine Factory Tested
Local Infrastructure Intelligence

Optimizing Power Reliability for Sihanoukville’s Rapidly Expanding Grid

As Cambodia’s premier deep-water maritime gateway and designated Special Economic Zone (SEZ) hub, Sihanoukville (Preah Sihanouk Province) represents one of Southeast Asia's most intense coastal power development environments. The accelerated expansion of the Sihanoukville Autonomous Port (PAS), the vast industrial developments within the Sihanoukville Special Economy Zone (SSEZ), and the surge of high-density commercial resort towers present rigorous demands on medium-voltage (MV) and high-voltage (HV) distribution networks.

Operating transformers in Sihanoukville requires solving three severe engineering challenges unique to coastal tropical regions:

C5-M Marine Anti-Corrosion

Sihanoukville’s year-round atmospheric salt spray and high relative humidity (exceeding 90% during monsoon seasons) rapidly degrade standard steel enclosures. Our oil insulated transformers feature multi-layer C5-M marine-grade epoxy polyurethane coating systems, tested to 1,500 hours of continuous salt spray exposure per ISO 12944-6.

EDC 22kV Grid Fluctuation Mitigation

Interconnections with Electricité du Cambodge (EDC) 22kV distribution feeders often experience voltage drops caused by long overhead line runs and industrial motor starts. Wisegj transformers incorporate multi-tap off-circuit tap changers (NLTC) or automatic on-load tap changers (OLTC) with a ±2×2.5% or ±5% regulation range.

Tropical Thermal Dissipation

Ambient peak temperatures in coastal Cambodia frequently surpass 40°C. Standard transformers suffer severe insulation thermal aging under such stress. Wisegj engineers optimize core-and-coil cooling duct geometry and employ high-grade mineral oils (IEC 60296) or synthetic ester fluids (FR3) to maintain Class A insulation limits (temperature rise ≤65K winding, ≤60K top oil).

Engineered Solutions for Key Sihanoukville Sectors

Jiangsu Wisegj Power Co., Ltd. supplies tailored oil immersed distribution transformers and pad-mounted substations engineered specifically for key local economic applications across Sihanoukville:

1. Sihanoukville Special Economy Zone (SSEZ) Manufacturing Plants

Textile mills, garment factories, electronics assembly, and metal fabrication plants within the SSEZ demand continuous, non-stop power. Our S11 hermetically sealed distribution transformers (500kVA to 2500kVA) utilize cold-rolled grain-oriented (CRGO) silicon steel cores with step-lap lamination techniques. This delivers exceptionally low no-load losses and high short-circuit withstand capabilities, shielding sensitive automated production lines from grid disturbances.

2. Port Logistics & Deep-Water Container Terminals

Heavy gantry cranes, refrigerated container plug-in stations (reefers), and bulk material handling equipment at Sihanoukville Autonomous Port create pulsating electrical loads with high harmonic content. Our custom-engineered pad-mounted units (ZGS series) and high-capacity oil transformers are constructed with reinforced winding mechanical clamping and electrostatic shielding between primary and secondary windings to prevent voltage spikes and harmonic resonance.

3. Urban High-Rise Resorts, Casinos & Mixed-Use Commercial Towers

For dense urban commercial areas in downtown Sihanoukville and coastal resort zones, space is premium and safety is paramount. Wisegj’s Dead-Front Three Phase Pad Mounted Transformers (IEEE standard) integrate medium-voltage loadbreak switches, bayonet current-limiting fuses, and oil-filled compartments into a single tamper-resistant, ground-level enclosure. This eliminates the need for expensive indoor substation rooms while providing child-safe, aesthetically pleasing outdoor installations.

Technical Selection Guide

Oil Insulated Transformer Specification Comparison

Transformer Architecture Primary Voltage Range Typical Capacity Cooling & Insulation Best Sihanoukville Application
S11 Hermetically Sealed Corrugated Tank 10kV / 15kV / 22kV / 35kV 30kVA – 2,500kVA ONAN Natural Mineral Oil / Natural Ester Industrial plants in SSEZ, overhead rural grid lines, pole-mounted / pad platforms.
ZGS / IEEE Pad-Mounted Compartmental 10kV / 13.8kV / 22kV / 34.5kV 75kVA – 3,000kVA ONAN / FR3 Fire-Resistant Liquid Resorts, casino complexes, solar power plants, underground cable distribution.
High-Voltage Power Transformer (OLTC) 35kV / 115kV / 230kV / 500kV 3.15MVA – 50MVA+ ONAN / ONAF Radiator Banks Primary sub-station interconnections, heavy metallurgy, utility step-down grid hubs.
Manufacturing Rigor & Credentials

Why International EPC Contractors & Utilities Partner with Wisegj

Jiangsu Wisegj Power Co., Ltd. (based in Suzhou, Jiangsu Province, China) operates a state-of-the-art power transformer manufacturing complex spanning over 6,847 square meters of verified workshop floor space. Backed by an engineering staff of over 50 technical specialists and over 20 years of team expertise, we provide full OEM, ODM, design-based, and custom tender-compliant manufacturing services for power distribution markets across Southeast Asia, North America, Europe, and Africa.

Verified ISO & CE Quality Certifications

Our production workflow operates under rigorous certified management systems:

  • ISO 9001:2015 Quality Management System: Cert No. 62824Q6052R0S
  • ISO 14001:2015 Environmental Management System: Cert No. 62824E6053R0S
  • ISO 45001:2018 Occupational Health & Safety: Cert No. 62824S6054R0S
  • CE Certificate for Oil-Immersed Power Transformers: Cert No. 3N230310.JYTU038 & M.2025.206.C121882
  • TÜV Rheinland On-Site Inspection Verified: Plant capacity, machinery, and testing facilities independently audited.

100% In-House Factory Acceptance Testing (FAT)

Every single oil insulated transformer built in our factory undergoes exhaustive routine testing in accordance with IEC 60076 and IEEE C57 standards before packing:

  • Winding resistance measurement across all tap positions
  • Voltage ratio check and vector group verification
  • Impedance voltage, short-circuit impedance, and load loss testing
  • No-load loss and no-load current measurement
  • Applied voltage AC withstand and Induced overvoltage withstand testing
  • Transformer oil dielectric breakdown voltage (BDV) & moisture analysis
Direct Engineering Guidance

Frequently Asked Questions for Transformer Procurement in Sihanoukville

Which primary and secondary voltage configurations match Sihanoukville’s EDC network? +

In Sihanoukville and Preah Sihanouk Province, Electricité du Cambodge (EDC) primarily operates its medium-voltage distribution network at 22kV (50Hz). However, internal industrial microgrids in the Sihanoukville Special Economy Zone (SSEZ) or specialized private generation plants may utilize 10kV, 15kV, or 35kV step-down systems. Secondary low voltages are typically configured to 400V three-phase / 230V single-phase with a Dyn11 vector group to support 4-wire neutral distribution. Wisegj builds multi-voltage primary taps (e.g., 22kV to 0.4kV with ±2x2.5% NLTC) tailored to exact local site requirements.

How does Wisegj protect transformers against coastal salt fog corrosion at Sihanoukville Autonomous Port? +

For transformers operating within 5 km of Sihanoukville’s coastline, standard industrial paint will pit and rust within months. We apply a heavy-duty ISO 12944 C5-M anti-corrosion coating system. The steel tank surface undergoes SA 2.5 shot blasting, followed by a zinc-rich epoxy primer, an epoxy intermediate coat, and a polyurethane topcoat with a minimum total dry film thickness (DFT) of 240 microns. Furthermore, all external fasteners, hardware, and radiator valves are upgraded to grade 316 stainless steel or hot-dip galvanized steel.

What shipping lead times and port logistics options are available for delivery to Sihanoukville? +

Because Sihanoukville Autonomous Port (PAS) is Cambodia’s principal deep-water port, direct sea freight container shipments from our production facility via Shanghai or Ningbo ports arrive at Sihanoukville Port in approximately 7 to 12 days transit time. We offer flexible Incoterms including FOB, CIF Sihanoukville, CFR, and full DDP (Delivered Duty Paid) to your project job site in SSEZ or city center. All transformers are shipped inside seaworthy wooden crates or heavy-duty flat-racks equipped with multi-axis shock recorders.

Can Wisegj transformers be customized for high ambient temperature and high humidity conditions? +

Yes. Standard transformers designed for temperate climates (30°C average) will experience thermal overload in Sihanoukville, where ambient temperatures can reach 45°C inside enclosed enclosures or under direct sunlight. We thermal-engineer our oil insulated transformers with expanded radiator surface areas, low-loss CRGO steel cores, high-temperature Class H/A insulation materials, and optional forced air (ONAF) cooling fans to guarantee full continuous rated kVA output without thermal derating.

What technical documentation and test reports are provided for utility approval? +

We supply a complete engineering package in English with every shipment, suitable for immediate submission to EDC engineers or third-party consultants. This includes general arrangement (GA) dimensional drawings, electrical schematic diagrams, official routine factory test reports (bearing unique unit serial numbers), transformer oil dielectric strength reports, certificate of origin (Form E available for ASEAN duty preferences), and comprehensive Operation & Maintenance (O&M) manuals.

Request a Custom Transformer Engineering Quotation for Sihanoukville

Submit your single-line diagrams (SLD), tender specs, or project required kVA ratings. Our senior power electrical engineers will review your parameters and issue an official factory quote and guaranteed loss data sheet within 24 hours.

Contact Us