10-25 kVAResidential Feeder Units
Compact low-profile transformers for subdivisions, rural underground loops and street lighting circuits.
- Rating10-25 kVA
- Primary5-25 kV
- StandardIEEE C57.12.38
10-250 kVA · 5-34.5 kV primary · 120/240 V and 277/480 V secondary · IEEE C57.12.38 & IEC 60076
Jiangsu Wisegj Power Co., Ltd. manufactures single phase pad mounted transformers for underground residential and commercial distribution. Standard ratings cover 10, 15, 25, 37.5, 50, 75, 100, 167 and 250 kVA with primary voltages from 5 kV to 34.5 kV and secondary voltages of 120/240 V, 120/208 V, 240/480 V, 277/480 V or project-specific values. Units can be supplied with mineral oil or natural ester fluid and are engineered to IEEE C57.12.38 or IEC 60076 depending on the destination market.
Each design is reviewed by transformer engineers before quotation. Core and winding selections are made for guaranteed no-load and load losses, temperature rise and sound level. Routine tests are performed on every serial number, and test reports, GA drawings, nameplates and O&M documents are supplied in English for procurement, approval and commissioning teams.
Common ratings are listed below for residential subdivisions, commercial sites, utility reinforcement and renewable interconnections. Custom voltage ratios, taps, fluids and enclosures can be engineered for project specifications.
10-25 kVACompact low-profile transformers for subdivisions, rural underground loops and street lighting circuits.
37.5-75 kVAReliable service for commercial buildings, shopping centers, schools and small industrial loads.
100-167 kVAHigh-capacity units for larger residential blocks, water treatment, EV charging hubs and utility reinforcement.
250 kVACustom-engineered designs for special primary voltages, high ambient conditions, coastal corrosion protection and renewable interconnections.
Use this guide for preliminary selection. Final ratings, losses, impedance, tap range, accessories and enclosure details are confirmed by our engineering team against the project datasheet.
| Parameter | Typical Range / Options | Procurement Note |
|---|---|---|
| Rated power | 10-250 kVA | Ratings outside the standard range can be reviewed as custom projects. |
| Primary voltage | 5, 10, 13.2, 13.8, 15, 20, 24.94, 34.5 kV and project-specific values | Voltage class and BIL are confirmed for the destination grid. |
| Secondary voltage | 120/240 V, 120/208 V, 240/480 V, 277/480 V and custom values | Secondary configuration is matched to the load and service entrance design. |
| Frequency | 50 Hz or 60 Hz | Core and winding design are adjusted for the specified frequency. |
| Cooling | ONAN | Temperature rise and ambient conditions are confirmed at design review. |
| Insulating fluid | Mineral oil or natural ester fluid | Fluid selection can support fire-safety or environmental requirements. |
| Core | CRGO silicon steel or amorphous core | Core grade is selected against no-load loss and efficiency targets. |
| Winding | Copper or aluminum | Conductor material is supplied to the approved technical specification. |
| Efficiency | DOE 2016, EU EcoDesign or project-specific loss limits | Guaranteed losses are stated on the approved data sheet. |
| Standards | IEEE C57.12.38, IEEE C57.12.28 enclosure, IEC 60076 | The applicable standard is confirmed for each destination market. |
| Feed configuration | Loop feed or radial feed | Switching, fusing and parking stands are configured to the network design. |
| Tap range | 2 x 2.5% or project-specific | Tap arrangement is confirmed against the primary voltage profile. |
| Enclosure | Powder-coated steel or stainless-steel option | Coastal, high-humidity and high-pollution environments can be reviewed. |
| Accessories | Bayonet fuse, weak link, pressure relief, oil sight glass, drain valve, lifting lugs, ground pads | Accessory list is fixed during drawing approval. |
| Testing | Routine tests per serial number; type test reports available | Third-party witness inspection can be arranged before shipment. |
The information above is a preliminary selection guide. Final technical data is confirmed on the approved GA drawing, nameplate drawing and test report for each order.
Every feature is selected to support safe installation, reliable operation and efficient maintenance in underground distribution networks.
Separate high-voltage and low-voltage compartments with tamper-resistant access for safer field operation.
Configurations can match looped underground networks or radial service arrangements without field modification.
Fuse and weak-link options provide coordinated protection for distribution transformers and downstream loads.
CRGO or amorphous core options and optimized winding design help meet efficiency and loss targets.
Powder-coated steel or stainless-steel options are available for coastal, humid and polluted environments.
GA drawings, nameplate drawings, routine test reports and O&M manuals are prepared in English for project approval.
Production is organized around documented work instructions and inspection checkpoints from core assembly through final testing, packing and loading.












Each transformer is built under a documented quality management system. The production team records inspection results by serial number, and the export team prepares the technical file required by procurement, consultants and commissioning engineers.
TÜV Rheinland has verified production capability, floorspace and onsite quality inspection for Jiangsu Wisegj Power Co., Ltd.
Quality management system
Certificate No. 62824Q6052R0S
Environmental management system
Certificate No. 62824E6053R0S
Occupational health and safety system
Certificate No. 62824S6054R0S
CE documentation is available for applicable product lines, including oil-immersed transformers, dry type transformers and compact substations.
Product design and testing are aligned with IEEE C57.12.38 or IEC 60076 according to the destination market.
Seaworthy packing, shipping marks, packing lists and export documents are prepared for the agreed Incoterms.
These transformers are commonly specified where underground service, tamper resistance and a compact footprint are required.
Underground residential loops, street lighting and community distribution where low-profile equipment is preferred.
Retail centers, offices, schools and mixed-use developments requiring reliable pad-mounted service entrances.
Small manufacturing units, workshops and logistics facilities with single phase distribution loads.
Interconnection points for distributed energy resources, storage systems and electric vehicle charging infrastructure.
Replacement and expansion projects where utilities need predictable lead times and documented test reports.
Water treatment facilities, agricultural loads and rural electrification programs with underground service requirements.
These answers cover common specification, testing and export questions for single phase pad mounted transformer projects.
Share your kVA rating, primary and secondary voltage, frequency, applicable standard and site conditions. Our engineering team will review the specification and return a compliant technical proposal with drawings, guaranteed losses and test documentation requirements.
[email protected]