Jiangsu Wisegj Power Co., Ltd.

Company Profile

Transformer and substation manufacturing for utilities, EPC contractors, industrial projects and renewable energy developers worldwide.

Corporate Overview

Engineering-Led Transformer Supply From Jiangsu, China

Jiangsu Wisegj Power Co., Ltd. designs, manufactures and exports power transformers, distribution transformers, pad mounted transformers, dry type transformers, compact substations and high and low voltage switchgear for projects from 220 V to 500 kV.

Our work begins with a technical review, not a catalogue shortcut. Before quotation, our engineers evaluate the applicable standard, voltage ratio, vector group, impedance, tap range, cooling method, loss target, site altitude, ambient temperature and installation conditions. This helps procurement teams compare a compliant design, documented losses and a clear delivery scope before the order is placed.

Production is organised around approved drawings, incoming-material inspection, controlled assembly and routine testing. For international buyers, we prepare English-language documentation including GA drawings, nameplate drafts, test reports, packing lists and O&M manuals, so engineering, compliance and logistics teams can review the same information.

  • Custom-built ratings and configurations for IEC, ANSI/IEEE and project specifications
  • Routine factory testing with traceable serial-number records
  • ISO 9001, ISO 14001 and ISO 45001 management systems
  • CE-certified product lines for oil-immersed transformers, dry type transformers, compact substations and switchgear
Transformer manufacturing workshop of Jiangsu Wisegj Power Co., Ltd.

Independently verified production information

Production floorspace, employee structure and quality-inspection practices are supported by onsite assessment by TÜV Rheinland. Certificate numbers and validity dates are available for compliance review.

Company at a Glance

Facts Procurement Teams Can Verify

Key company data is listed for initial supplier screening. Project-specific documents are supplied during technical and commercial review.

220 V – 500 kVVoltage range covered by our transformer and substation portfolio.
6,847 m²Verified production floorspace supporting assembly and testing.
ISO 9001 / 14001 / 45001Quality, environmental and occupational health & safety management systems.
CECertified product lines for oil-immersed, dry type, compact substation and switchgear applications.
211Qualified supply-chain partners for stable component and material sourcing.
4.9 / 5Average buyer rating reported through our export sales channel.
Product Scope

Transformer and Substation Categories

Each product family is configured around the destination market, grid code, installation environment and buyer documentation requirements.

Power Transformers

Step-up and step-down units for utility substations, industrial plants and renewable grid interconnection, with cooling, tap and impedance options reviewed against project data.

Oil Immersed Distribution Transformers

Hermetically sealed and conservator designs for distribution networks, using mineral oil or natural ester fluids and loss levels selected for local efficiency requirements.

Pad Mounted Transformers

Tamper-resistant, compartmental units for underground distribution, commercial sites, data centres, campuses and renewable projects in ANSI/IEEE and IEC markets.

Dry Type Transformers

Cast resin, oil-free designs for hospitals, high-rise buildings, tunnels, marine environments and other locations where fire safety and indoor installation matter.

Compact Substations

Factory-assembled MV switchgear, transformer and LV distribution in a prefabricated enclosure for faster site commissioning and consistent quality control.

High and Low Voltage Switchgear

Switchgear and distribution assemblies integrated with transformer packages, with drawings, inspections and test documentation prepared for buyer review.

Manufacturing Capability

Inside Our Production and Quality Workflow

From material control and winding to testing and export packing, each step is linked to documented work instructions and inspection checkpoints.

01

Specification Review

Engineers check ratings, standards, site altitude, ambient conditions and installation method.

02

Drawing & Loss Confirmation

GA drawing, nameplate data and guaranteed losses are confirmed before production.

03

Controlled Production

Core, winding, drying, tanking and assembly are managed with in-process QC records.

04

Routine Testing

Electrical tests and inspection records are prepared for each serial number.

05

Packing & Dispatch

Export packing, shipping marks and documentation are checked before shipment.

Certifications & Compliance

Documented Management Systems and Product Certification

Certificate numbers are listed for verification. Buyers should confirm scope and validity against the issuing body and the project’s compliance requirements.

ISO 9001

Quality management system. Certificate No. 62824Q6052R0S. Validity: 2024–2027.

ISO 14001

Environmental management system. Certificate No. 62824E6053R0S. Validity: 2024–2027.

ISO 45001

Occupational health and safety management system. Certificate No. 62824S6054R0S. Validity: 2024–2027.

CE · Oil-Immersed Power Transformer

Certificate No. 3N230310.JYTU038. Scope: oil-immersed power transformer. Validity: 2023–2028.

CE · Dry Type Transformer

Certificate No. FQC2530404. Scope: dry type transformer. Validity: 2025–2030.

CE · Oil Immersed Transformer

Certificate No. M.2025.206.C121882. Scope: oil immersed transformer. Validity: 2025–2030.

CE · Compact Substation

Certificate No. M.2025.206.C121884. Scope: compact substation. Validity: 2025–2030.

CE · Switchgear

Certificate No. ICR/VC/HM2506248. Scope: switchgear. Validity: 2025–2030.

Verification AreaWhat Is DocumentedWhy It Matters to Buyers
Incoming MaterialsCopper, core steel, insulation materials, oil, bushings and key accessories are checked against approved specifications.Supports traceability and consistency before production begins.
In-Process Quality ControlWinding, core assembly, drying, tanking and assembly checks are recorded at defined production stages.Helps identify deviations before the unit reaches final testing.
Routine Electrical TestsWinding resistance, voltage ratio, vector group, impedance, load loss, no-load loss and current, applied voltage and induced voltage tests are recorded as applicable.Gives the buyer measurable evidence that the unit matches the approved design and standard.
Final InspectionNameplate, finish, accessories, documents and packing status are checked before dispatch.Reduces the risk of shipment mismatches and site delays.
Export Packing & DocumentationExport-grade packing, shipping marks, packing list, test reports and manuals are prepared for shipment.Supports logistics planning, customs review and site handover.
Global Supply

Export Support for Utilities, EPCs and Industrial Buyers

Equipment configurations are adapted to local grid codes, 50/60 Hz systems, climate conditions and installation practice in each market.

North America

ANSI/IEEE-oriented pad mounted, pole mounted and distribution transformer configurations for utilities, solar projects and commercial developments.

South America

Distribution and power transformer packages for mining, utilities and high-altitude installations, with climate and altitude factors reviewed during design.

Western Europe

CE-certified IEC equipment, dry type transformers and compact substations for projects requiring clear documentation and compliance review.

Middle East

High-ambient and coastal-environment designs with cooling, enclosure protection and material choices reviewed for heat, dust and humidity.

Southeast & Central Asia

Utility distribution transformers, industrial park substations and transformer packages for grid expansion and infrastructure programs.

Africa

Rural electrification, mining and compact substation applications where fast deployment, maintainability and spare-part planning are important.

Incoterms

FOB, CFR, CIF, EXW, FCA, CPT, CIP and DDP can be quoted according to project needs.

Documentation

English GA drawings, test reports, O&M manuals and packing lists accompany the shipment.

Technical Response

Engineers review specification questions and reply with a clear technical position rather than generic sales copy.

Buyer FAQ

Questions Procurement Teams Ask Us

Direct answers on company capability, standards, customization and export documentation.

Is Jiangsu Wisegj Power Co., Ltd. a manufacturer or trading company?
Jiangsu Wisegj Power Co., Ltd. is a China-based transformer and substation supplier with manufacturing, engineering, quality control and export functions. Production is supported by an inspected facility in Jiangsu and qualified supply partners, with project-specific equipment manufactured to approved drawings and test plans.
Which standards and certifications support your transformer supply?
Equipment can be designed and tested to IEC 60076, IEEE C57.12, IEC 62271 and related standards. Management systems are ISO 9001, ISO 14001 and ISO 45001 certified. Product lines hold CE certificates for oil-immersed transformers, dry type transformers, compact substations and switchgear.
Can transformers be customized for project-specific requirements?
Yes. Customization covers ratings, voltage ratio, vector group, impedance, tap range, cooling method, insulating fluid, bushing configuration, enclosure color, nameplate language and documentation requirements.
What documentation is provided with an order?
Typical documentation includes GA drawings, nameplate drafts, routine test reports, O&M manuals, packing lists and applicable certificates. Documentation can be prepared in English for engineering, procurement and compliance review.
How is equipment prepared for international shipment?
Equipment is prepared with export-grade packing, accessory protection and shipping marks. Shock indicators can be supplied for sensitive items, and Incoterms such as FOB, CFR, CIF, EXW, FCA, CPT and DDP can be quoted according to project needs.

Send technical documents to [email protected] for engineering review.

Discuss Your Transformer or Substation Requirement

Share your datasheet, single-line diagram, tender specification or site conditions. Our engineering and export teams will review the requirement and prepare a documented technical-commercial response.

Inquire Now