Factory-direct · France 50 Hz · IEC / CE documentation

Three Phase Isolation Transformer Factory & Wholesalers in the France Market

A France-focused sourcing guide for wholesalers, EPC contractors and panel builders: three-phase isolation transformers, oil-immersed distribution units, pad-mounted transformers and step-up solutions engineered by Jiangsu Wisegj Power Co., Ltd.

Inquire Now Engineering review within one working day
8 Factory Product Lines

Three-Phase Transformer Products for French Wholesalers and Project Buyers

For France, the most reliable starting point is the exact transformer family, not a generic catalogue page. The eight listed products cover solar PV, on-load tap changing, pad-mounted distribution, industrial power supply, step-up conversion and dead-front designs. All product links are preserved for direct technical review.

C Certification 50/60Hz 6KV 10KV 20KV 35KV three phase 1000KVA 1MW solar PV oil immersed transformer

C/CE 6–35 kV Solar PV Oil-Immersed Transformer, 1000 kVA / 1 MW

Oil-immersed three-phase transformer for solar PV generation blocks and MV interconnection studies in 50/60 Hz projects.

Solar PV50/60 HzOil immersed
View product
MAIN ROLLER D industrial roller product from the factory catalogue

MAIN ROLLER D

Heavy-duty roller product included in the current factory listing. Confirm drawings, material and integration data before quotation.

Factory listingDrawing on request
View product
C CE 10KV 20KV 35KV 1000KVA 2000KVA 2500KVA three phase oil type on load tap changer transformer

C/CE 10–35 kV Three-Phase On-Load Tap Changer Transformer, 1000–2500 kVA

Oil-type transformer with on-load tap changing for industrial power supply where voltage regulation is part of the process requirement.

OLTCIndustrial10–35 kV
View product
C certified 75 to 2500 kVA oil type three-phase pad-mounted transformer with 480V output

C/CE 75–2500 kVA Oil-Type Three-Phase Pad-Mounted Transformer, 480 V Output

Pad-mounted oil transformer for distribution projects requiring 35 kV input, 480 V output and 50/60 Hz flexibility.

Pad-mounted75–2500 kVA480 V
View product
C certified oil type cooper 75 to 2500 kVA dead front pad mounted three phase transformer

C/CE 6–34.5 kV Dead-Front Oil-Type Pad-Mounted Transformer, 75–2500 kVA

Dead-front pad-mounted transformer for 6–34.5 kV systems, copper windings and space-conscious distribution layouts.

Dead-frontCopper6–34.5 kV
View product
C CE MV HV ZGS11 75 to 2500 kVA pad mounted three phase distribution transformer

C/CE ZGS11 75–2500 kVA MV/HV Pad-Mounted Distribution Transformer

ZGS11 pad-mounted distribution transformer for 10–35 kV compact grid connections and electric power distribution.

ZGS11MV/HVDistribution
View product
C CE 50/60Hz 6KV 10KV 15KV 20KV 35KV 100KVA to 500KVA step up oil transformer with 220V output

C/CE 6–35 kV Step-Up Oil Transformer, 100–500 kVA, 220 V Output

Oil-immersed step-up transformer for industrial voltage conversion, test facilities and small generation blocks.

Step-up100–500 kVAIndustrial
View product
Listed C CE MV HV 50/60Hz three phase pad mounted transformer for industrial power supply

Listed C/CE MV/HV 50/60 Hz Three-Phase Pad-Mounted Transformer

Three-phase pad-mounted transformer for 6–35 kV industrial power supply in 50/60 Hz networks, with project-specific protection and enclosure options.

Industrial supply6–35 kV50/60 Hz
View product
20+
Years of team experience in transformer engineering
500 kV
Maximum voltage class supplied across the transformer portfolio
6,847 m²
Verified production floorspace
50+
R&D and technical engineers
211
Qualified supply-chain partners
4.9/5
Average buyer rating stated by the company
Localized Market Intelligence

Why France Is a Distinct Specification Environment for Isolation Transformers

A three-phase isolation transformer bought for Lyon, Marseille or a data centre in the Paris region is not automatically the same unit that suits a 60 Hz export project. The French grid, installation rules, energy-performance expectations and documentation habits all influence the final design.

50 Hz, 20 kV and 230/400 V: start with the grid

France operates at 50 Hz. Public MV distribution is commonly 20 kV, with 15 kV legacy networks still present in parts of the country, while LV building systems typically use 230/400 V. For a three-phase isolation transformer, this affects turn ratios, flux density, loss values, temperature rise, impedance and routine-test settings.

Specify the frequency, primary and secondary voltage, vector group, tap range, impedance, no-load and load loss, and intended neutral treatment. For Enedis-connected projects, the connection offer and single-line diagram should drive the transformer interface, not a generic catalogue description.

CE marking, Ecodesign and NF installation context

Applicable transformer families should be CE certified and designed to IEC 60076 / NF EN 60076 requirements. EU Ecodesign rules for transformers, including Regulation (EU) 548/2014 as amended by 1253/2014, make loss performance a procurement issue rather than an engineering afterthought.

French installation practice also brings NF C 15-100 for LV installations and NF C 13-100 / NF C 13-200 for MV installations into the discussion. The transformer is one part of the compliance chain; cable boxes, protection, earthing, ventilation and access must be coordinated.

Compact siting, noise and fire strategy

French projects often combine tight urban plots with strict acoustic and fire-safety expectations. Pad-mounted oil-immersed units are practical where outdoor space and cable access permit; cast-resin dry-type or compact substations are often considered where indoor fire risk, maintenance access or building integration dominates.

For an isolation transformer in a hospital, laboratory, data centre or automation line, the decision should include harmonic load, neutral grounding, inrush, short-circuit withstand, enclosure IP rating, anti-corrosion finish and the permitted noise level at the property boundary.

An isolation transformer adds galvanic separation between source and load. It can support a separately derived system, reduce transferred common-mode noise, limit certain fault paths and provide a controlled voltage interface for sensitive equipment. It should not be selected as a universal cure for power-quality problems. The French buyer should provide the single-line diagram, load profile, harmonics study, earthing arrangement and the standard to which the installation will be verified. With that data, the factory can recommend a step-down, step-up or 1:1 isolation design, and confirm whether oil-immersed, dry-type, pad-mounted or skid-mounted construction is appropriate.

Localized Applications

Where Three-Phase Isolation Transformers Are Used in France

French demand is not limited to utility distribution. Isolation and distribution transformers sit inside data centres, hospitals, factories, renewable plants and EV charging infrastructure, each with a different risk profile.

Data centres and digital infrastructure

Paris, Lyon and Marseille data-centre clusters need predictable power quality and compact electrical rooms. Three-phase isolation transformers can separate UPS output from IT load, support a separately derived 230/400 V system and attenuate transferred common-mode noise.

French projects usually demand low loss, low noise, clear thermal design and third-party witness testing. Specify 50 Hz, load profile, neutral arrangement, fire strategy and future expansion before choosing oil-immersed or dry-type construction.

Hospitals, laboratories and sensitive buildings

Healthcare and research sites in France combine patient safety, imaging loads, ventilation, lifts and IT systems. Isolation transformers are used in medical IT systems where required, and for sensitive laboratory equipment that needs a controlled source.

The specification should reference the applicable NF C 15-211 medical-location requirements, leakage current, alarm monitoring, thermal class and acoustic limits. A transformer that is electrically correct but poorly documented or difficult to maintain can become a commissioning delay.

Industrial automation, robotics and manufacturing

French manufacturers investing in automation, robotics, welding and variable-speed drives need transformers that tolerate harmonic-rich loads and motor starting. An oil-immersed unit with on-load tap changer can hold secondary voltage across a shift, while an isolation transformer can create a defined grounding interface for a sensitive production line.

Provide the load list, duty cycle, short-circuit current, ambient temperature, altitude and permissible voltage drop. For retrofit projects, physical dimensions and cable-entry positions are often as important as the kVA rating.

Solar PV, EV charging and grid edge

France’s decarbonisation programme is adding solar PV, battery storage, heat pumps and EV charging to networks that were not designed for every new load pattern. Step-up and pad-mounted transformers connect generation and charging hubs to the MV network; isolation transformers protect downstream equipment and define grounding.

The procurement package should include the connection voltage, 50 Hz frequency, grid-code requirements, protection interface, enclosure rating and the Enedis or local network operator’s connection conditions.

France Market Trends

Localized Development Trends Shaping Transformer Procurement

The French transformer market is being reshaped by electrification, efficiency rules and supply-chain resilience. These trends change what wholesalers should stock and what project buyers should specify.

Electrification is pushing transformers closer to the load

Heat pumps, EV charging, electric boilers, data centres and reindustrialisation projects are increasing LV demand in places where the MV network has limited spare capacity. The result is more compact substations and pad-mounted transformers close to buildings, car parks and industrial units.

French wholesalers are being asked for shorter quotation cycles, complete drawings and documentation that can be checked by an engineering office before the order is placed.

Efficiency is now a financial and compliance metric

EU Ecodesign loss limits, volatile energy prices and corporate carbon reporting have made transformer efficiency a board-level metric in France. Buyers compare guaranteed no-load and load losses, not just kVA.

They ask for loss capitalisation, noise data, temperature-rise test evidence and a clear maintenance plan. For a factory, this means offering low-loss cores, optimised winding design and test reports that are consistent with the quoted values.

Resilience and local support matter as much as price

Long international supply chains have made French buyers more attentive to factory verification, packing quality, spare parts and response time. A wholesaler needs a manufacturer that can confirm the technical offer, freeze drawings, provide French documentation when requested, and keep the shipment traceable.

Incoterms and payment currency are part of the same resilience discussion: EUR pricing, CFR Le Havre or DDP project-site delivery may be more valuable than a lower headline FOB price if the buyer has to absorb unforeseen logistics risk.

Application-Led Product Recommendation

Match the Transformer Family to the French Project Signal

Use this table as a first engineering conversation, not as a substitute for a single-line diagram. The right transformer is the one that meets the installation standard, load profile and documentation requirement with the lowest whole-life risk.

Project signal in France Recommended transformer route Typical France configuration Procurement check
Urban or campus distribution with underground cables C/CE pad-mounted oil or ZGS11 distribution transformer 20 kV / 400 V, 50 Hz, 75–2500 kVA, dead-front options Confirm cable box, loop or radial feed, access and noise limit.
Solar PV, storage or generation step-up Solar PV oil-immersed or step-up oil transformer 0.4–35 kV step-up, 1000 kVA blocks, 50/60 Hz Provide grid code, protection study and harmonic data.
Industrial line with voltage swings On-load tap changer oil transformer 10–35 kV, 1000–2500 kVA, OLTC Define tap range, motor starting and short-circuit duty.
Medical, laboratory or fire-sensitive indoor load Dry-type or isolation transformer family quoted separately 20 kV/400 V or 400/400 V, low noise Reference NF C 15-211 where medical; confirm fire strategy.
Tight urban plot or fast-track substation Compact substation or pad-mounted solution MV switchgear + transformer + LV in one enclosure Check IEC 62271-202, access, ventilation and delivery route.
Wholesaler stock or repeat programme Standardised pad-mounted or oil-immersed range 50 Hz, CE, French nameplate, fixed documentation pack Lock drawing, test and packing standards before repeat orders.

For French projects, request the latest CE certificate, routine-test report and nameplate drawing together with the offer. A transformer should not be released for production until the standard, frequency, voltage ratio, vector group, impedance, losses, tap range and site conditions are written into the approved documents.

Factory Authority & E-E-A-T

Why Wisegj Can Support French Wholesalers Beyond a Price List

Jiangsu Wisegj Power Co., Ltd. is a Suzhou-based manufacturer and exporter, not an anonymous marketplace listing. The company supplies pad-mounted, oil-immersed, dry-type and power transformers, compact substations and high/low-voltage switchgear from 220 V to 500 kV. For France, the relevant value is not simply “factory price”. It is the ability to translate a French single-line diagram into a manufacturable unit, prove the test values and deliver documentation that an engineering office can approve.

Verified business facts that matter in a French tender file include a production floorspace of 6,847 m², more than 50 R&D and technical engineers, 211 qualified supply-chain partners, more than 20 years of team experience in transformers, and a maximum supplied voltage class of 500 kV. Production is managed under ISO 9001, ISO 14001 and ISO 45001 systems; applicable product lines hold CE certification. The company also states that its production capability, floorspace and quality inspection have been verified onsite by TÜV Rheinland, an independent third-party body.

  • Own production base with industry certificates
  • 50+ engineers in R&D and technical support
  • Supplier to Fortune 500 companies
  • 24-hour pre-sale and after-sale response
  • OEM, ODM and design-based customization
  • Finished-product inspection on every unit
Wisegj company overview and transformer production facility
Transformer assembly workshop
Transformer testing laboratory
Transformers packed for export shipment
Certificates & Factory Tests

Compliance Evidence French Buyers Can Verify

Certificate numbers are listed so a compliance team can verify them with the issuing body. Project-specific compliance must still be confirmed against the latest certificate, nameplate, drawing and routine-test report.

CE · Power Transformer

Oil-immersed power transformer
No. 3N230310.JYTU038
Validity shown: 2023–2028

CE · Oil Immersed

Oil immersed transformer
No. M.2025.206.C121882
Validity shown: 2025–2030

CE · Dry Type

Dry type transformer
No. FQC2530404
Validity shown: 2025–2030

CE · Compact Substation

Compact substation
No. M.2025.206.C121884
Validity shown: 2025–2030

ISO 9001

Quality management system
No. 62824Q6052R0S
Validity shown: 2024–2027

ISO 14001 & ISO 45001

Environmental management
No. 62824E6053R0S
Health & safety management
No. 62824S6054R0S

Routine tests include winding resistance, voltage ratio and vector group, impedance and load loss, no-load loss and current, applied and induced voltage withstand, and oil dielectric strength for liquid-filled units. Third-party witness inspection is welcome. For French buyers, the important point is not simply that a test exists, but that the test report matches the serial number, the approved drawing and the loss values in the purchase order.

Wholesaler & EPC Support

How the Factory Supports French Wholesalers, Panel Builders and EPC Teams

A France-ready transformer offer combines engineering, documentation, packing and commercial terms. The factory must be able to repeat the same standard for future orders, not only deliver one sample.

OEM and private-label programmes

OEM, ODM, design-based and sample-based customization are available, covering ratings, vector group, impedance, tap range, bushing configuration, cooling method, insulating fluid, enclosure color and nameplate language. French wholesalers can build a localised range without carrying every drawing in-house.

Documentation and language

GA drawings, nameplate drafts, routine test reports and O&M manuals are supplied in English as standard; French-language nameplates and documentation can be quoted. For a French tender, this reduces the risk that a technically acceptable transformer is blocked by a documentation gap at commissioning.

Export logistics and Incoterms

Export packing uses seaworthy protection and impact indicators where specified. Incoterms include FOB, CFR, CIF, EXW, FCA, CIP, CPT and DDP; payment methods include T/T, L/C, D/P and D/A; currencies include USD, EUR, GBP, CAD, AUD and other major currencies.

After-sales and repeat orders

Technical questions receive a qualified response within one working day in the company’s stated service model. Spare parts, replacement accessories and site-support documents can be included in the commercial offer. For wholesale programmes, the factory can hold a defined documentation pack and repeat-build standard.

Illustrative France-readiness scorecard

Positioning based on the support functions a French wholesaler typically evaluates before releasing a purchase order.

Specification review96%
CE and test documentation94%
French-language support on request88%
Export and Incoterms flexibility92%
France Buyer FAQ

Questions French Wholesalers and Project Buyers Ask

Straight answers from the engineering and export perspective. For a precise offer, send the single-line diagram, load data and applicable standards with the inquiry.

What is the difference between a three-phase isolation transformer and a distribution transformer?
A distribution transformer is normally selected to step the network voltage down for a building or area. A three-phase isolation transformer is selected to provide galvanic separation between source and load, and may be 1:1 or include a voltage change. In France, the same physical transformer may serve an isolation duty, but the specification must state the purpose, neutral arrangement, grounding, harmonic load and applicable installation standard.
Which voltage should a French project specify?
France operates at 50 Hz. MV distribution is commonly 20 kV, with 15 kV legacy networks in some areas, while LV systems are typically 230/400 V. The final specification should come from the single-line diagram and the network operator’s connection conditions. Do not order from a 60 Hz catalogue description without converting the frequency, loss, impedance and test requirements.
Are transformers CE marked and aligned with EU Ecodesign rules?
Applicable product lines hold CE certification, and production runs under ISO 9001, ISO 14001 and ISO 45001 systems. Transformer design can follow IEC 60076 / NF EN 60076 and the EU Ecodesign loss framework. Final compliance depends on the rating, the latest certificate, the nameplate, the test report and the installation conditions. Ask for the certificate number and the guaranteed loss values in the offer.
Can you supply 50 Hz units and test at 50 Hz?
Yes. The order must clearly state 50 Hz operation and the test frequency. A 60 Hz-only nameplate or loss quotation is not acceptable for a French project unless it has been formally converted and approved. Provide the frequency, voltage ratio, vector group, impedance, tap range and loss requirements at the quotation stage.
Which factory tests and documents are provided before shipment?
Routine tests include winding resistance, voltage ratio and vector group, impedance and load loss, no-load loss and current, applied and induced voltage withstand, plus oil dielectric strength for liquid-filled units. Documentation can include GA drawings, nameplate drafts, routine test reports and O&M manuals. Third-party witness inspection is welcome.
What is the typical lead time for delivery to France?
Lead time depends on the transformer rating, enclosure, tap changer, accessories, test requirements and current factory schedule. It should be quoted after drawing approval, not assumed from a generic catalogue page. For repeat wholesale programmes, the factory can agree a documentation pack and production standard to shorten future order cycles.
Can French-language nameplates and documentation be supplied?
French-language nameplates and documentation can be quoted on request. English documentation is standard. For French tenders, confirm the required language, units, protection settings, test-report format and drawing title block before production. This avoids rework at the commissioning stage.
What Incoterms, payment terms and currencies are accepted?
Trade terms include FOB, CFR, CIF, EXW, FCA, CIP, CPT and DDP. Payment options include T/T, L/C, D/P and D/A. Currencies include USD, EUR, GBP, CAD, AUD and other major currencies, as agreed per contract. For French buyers, CFR Le Havre, CIF Marseille or DDP project-site delivery can be evaluated against the total landed cost.
Next Step

Send the French Project Data—Not Just a kVA Figure

Share the single-line diagram, transformer datasheet or tender specification. Include rated power, primary and secondary voltage, 50 Hz frequency, vector group, impedance, tap range, loss target, site altitude, ambient conditions, enclosure rating and applicable IEC / NF requirements. A transformer engineer can then review the design instead of a sales script.

Email: [email protected] · Factory: Jiangsu Wisegj Power Co., Ltd., Suzhou, Jiangsu, China

Inquire Now