Step Up Transformer Factory & Exporter in Bucharest

High-Efficiency Utility-Grade Step-Up & Distribution Power Transformers Built for CEE Regional Grid Modernization

Product Showcase

Engineered Step-Up & Pad-Mounted Transformer Portfolio

Custom-engineered oil-immersed, dry-type, and pad-mounted transformers from 50 kVA to 500 MVA, complying fully with IEC 60076, IEEE C57, and EN European EcoDesign standards for utility and industrial deployment.

C CE S11 3 Phase Oil Immersed Transformer 50KVA-300KVA
S11 Low-Loss Series
  • Voltage Class: 6kV / 10kV / 20kV / 35kV
  • Capacity Range: 50 kVA - 300 kVA
  • Core Type: High-Permeability CRGO Steel
C CE MV HV Pad Mounted Transformer 750KVA-2500KVA
Pad-Mounted Industrial
  • Capacity: 750 kVA to 2500 kVA
  • Enclosure: Tamper-proof Dead Front
  • Application: Heavy Industrial & Solar Parks
Industrial Oil Immersed Step Up Transformer 220V to 35KV
Dedicated Step-Up
  • Voltage Step-Up: Low LV (220V/400V) to 35kV
  • Power Output: 100 kVA - 500 kVA
  • Feature: High Short-Circuit Withstand
S11 Three Phase Distribution Oil Transformer
Distribution Class
  • Ratings: 100 kVA - 630 kVA
  • Design: Hermetically Sealed Corrugated Tank
  • Vector Group: Dyn11 / Yyn0 Custom
American Standard 3000kva Pad Mounted Transformer
ANSI / IEEE Standard
  • Power Rating: 3000 kVA
  • Primary/Secondary: 34.5kV to 480V / 380V
  • Configuration: Loop / Radial Feed
S11 10kV 20kV 35kV 3 Phase Oil Immersed Transformer
Medium Voltage Grid
  • Voltage Taps: 10kV, 20kV, 35kV
  • Power Capacity: 50 kVA - 200 kVA
  • Efficiency: Energy Star & EU EcoDesign Tier 2
3 Phase Pad Mounted Pedestal Transformer for Industrial
Pedestal Substation
  • High/Med Voltage: 6kV - 35kV Input
  • Power Output: 100 kVA to 630 kVA
  • Insulation: High Dielectric Oil / Ester Fluid
Certified 75-2500KVA Oil Type Pad Mounted Transformer
Heavy Duty Utility
  • Primary Voltage: 35kV Grid Step Down/Up
  • Rating Range: 75 kVA - 2500 kVA
  • Certifications: CE Certified & ISO Verified
20+
Years Engineering Expertise
500 kV
Max Voltage Capability
6,847 m²
TÜV Verified Workshop
100%
Routine Test Inspected

Industrial Step-Up Transformer Architecture in CEE & Bucharest Grids

As Central and Eastern Europe (CEE) accelerates its electrical infrastructure upgrade under the European Green Deal and Romania's National Recovery and Resilience Plan (PNRR), the demand for high-reliability, low-loss step-up transformers in Bucharest and surrounding metropolitan industrial hubs (such as Ilfov County, Măgurele Science Park, and West Bucharest Logistics Corridor) has expanded exponentially. Step-up transformers serve as the critical power-conditioning linkage between low-voltage generation sources—such as photovoltaic inverter stations (0.4kV, 0.69kV, or 0.8kV AC), biogas turbine co-generation sets, and industrial generators—and medium-voltage (10kV, 20kV, 35kV) or high-voltage (110kV, 220kV) distribution lines managed by regional Distribution System Operators (DSOs) like Distribuție Energie Muntenia.

A specialized step-up transformer exporter serving Bucharest must satisfy stringent thermal dynamics, harmonic suppression, and short-circuit withstand capabilities (IEC 60076-5). Unlike standard step-down distribution units where primary voltages experience relatively linear load flows, step-up transformers deployed at generation interfaces encounter unique electrical stresses:

High Thermal & Harmonic Stress Management

Modern inverter-based solar and wind generation units emit high-frequency harmonics (THD). Our step-up transformers incorporate customized K-Factor ratings (K-9 to K-13) and electromagnetic shield barriers between LV and HV windings to prevent harmonic heating and eddy current losses in core laminations.

Strict Vector Group Alignment (YNd11 / Dyn11)

Correct phase-angle shift is paramount when stepping up voltage to synchronize with the National Power System (SEN) grid in Romania. We custom-wind vector configurations including YNd11, Dyn11, and YNyn0 with on-load tap changers (OLTC) or off-circuit tap changers (NLTC) tailored to local DSO interconnections.

Low No-Load ($P_0$) & Load Loss ($P_k$) Profile

Complying strictly with EU EcoDesign Directive Tier 2 (EN 50588-1), our step-up transformers utilize high-permeability, domain-refined Cold Rolled Grain Oriented (CRGO) silicon steel cores (such as 23ZDMH95 or M0H grade) to minimize standing core losses during non-generating or low-irradiance periods.

Enhanced Basic Impulse Level (BIL) Insulation

In accordance with Romanian ANRE regulations and CEE climatic lightning activity, our 20kV and 35kV step-up units feature enhanced dielectric insulation levels, supporting full-wave lightning impulse withstand voltages up to 170kV/200kV BIL.

Localized Application Scenarios in Bucharest & CEE Industrial Zones

Deploying power transformers in the Greater Bucharest Area requires acute engineering awareness of local climate parameters, soil resistivity, urban density constraints, and DSO grid code specifications. Jiangsu Wisegj Power Co., Ltd. supplies targeted transformer designs across four major local scenarios:

1. Utility Solar PV & BESS Grid Interconnection (Dobrogea & Muntenia)

In renewable installations supplying green power to Bucharest, large central inverter stations convert DC solar energy to 0.69kV AC. Our 35kV Step-Up Oil Immersed Transformers step up this voltage directly to the 35kV regional collector bus. Fitted with synthetic ester fluids (FR3), these units operate safely near agricultural lands with zero soil contamination risks.

2. Bucharest Industrial Parks & Heavy Manufacturing

Manufacturing facilities in Militari, Jilava, and Pantelimon require dedicated step-up or step-down pad-mounted substations. Our tamper-proof, dead-front Three Phase Pad Mounted Transformers (750 kVA - 2500 kVA) provide compact outdoor placement without requiring expensive concrete housing structures.

3. Data Center Clusters & Telecommunication Hubs in Ilfov

With Bucharest rapidly evolving into South-Eastern Europe's premier cloud computing hub, mission-critical data centers require low-noise, flame-retardant power solutions. Our Cast Resin Dry Type Transformers (Class F/H Insulation) deliver low partial discharge (<10 pC) and non-explosive performance inside urban indoor substations.

4. Bucharest Metro (Metrorex) & Municipal Infrastructure Modernization

Subterranean transit extensions and traction substations demand compact substations integrating MV vacuum circuit breakers, high-efficiency transformers, and LV switchgear. Our factory-prefabricated Compact Kiosk Substations reduce onsite installation timelines from weeks to days in congested urban environments.

Localized Development Trends & Regulatory Standards in Romania

Procurement directors and EPC contract managers in Bucharest must align equipment purchasing with evolving European electrical codes and Romanian energy directives. Key trends driving step-up transformer specifications include:

  • Mandatory EN 50588-1 EcoDesign Compliance: The European Union enforces strict upper limits on no-load losses ($P_0$) and load losses ($P_k$). Traditional high-loss transformers are prohibited from installation across Romania and all EU member states. Wisegj Power’s step-up units exceed EcoDesign Tier 2 targets through laser-scribed silicon steel cores and optimized copper conductor cross-sections.
  • ANRE Grid Code Technical Order 127/2021 Alignment: Romania's National Energy Regulatory Authority (ANRE) requires strict voltage stability, frequency response, and fault-ride-through (FRT) withstand capabilities for all step-up generation transformers connected to medium voltage distribution feeders.
  • Transition to Eco-Friendly Biodegradable Esters: To comply with municipal environmental directives in Bucharest, energy buyers are replacing traditional mineral oil with natural/synthetic ester fluids. Ester-filled transformers offer a flash point above 300°C (K-class fire rating) and 100% biodegradability within 28 days.
  • Digitalization & Smart Substation Interfaces: Modern CEE power grids require real-time monitoring. Our transformers come ready for integration with SCADA systems, equipped with PT100 temperature sensors, oil level transmitters, pressure relief contacts, and optional Dissolved Gas Analysis (DGA) sensors via Modbus/IEC 61850 protocols.

Technical Specification Comparison Matrix

Engineering parameters for step-up and distribution power transformers engineered by Jiangsu Wisegj Power Co., Ltd. for European and international projects:

Transformer Type Capacity Range Primary / Step-Up Voltage Secondary Voltage Insulation / Cooling Standard Compliance
Industrial Step-Up Oil Immersed 100 kVA - 2,500 kVA 0.22 kV / 0.4 kV / 0.69 kV 6 kV / 10 kV / 20 kV / 35 kV ONAN / ONAF Mineral Oil or Ester IEC 60076, CE Certified, EN 50588-1
S11 Distribution Series 30 kVA - 1,600 kVA 6 kV / 10 kV / 20 kV / 35 kV 400 V / 230 V (Custom available) Hermetically Sealed ONAN IEC 60076-1, ISO 9001, CE
Pad-Mounted Pedestal Unit 75 kVA - 3,000 kVA 10 kV / 20 kV / 34.5 kV / 35 kV 480V / 400V / 220V Dead-Front Loop/Radial Feed IEEE C57.12.34, ANSI, CE
Cast Resin Dry-Type Unit 50 kVA - 3,150 kVA 6 kV / 10 kV / 20 kV / 35 kV 400 V / 230 V Class F / H AN / AF Air Cooled IEC 60076-11, CE Certified
High Voltage Power Transformer 2.5 MVA - 500 MVA 35 kV / 110 kV / 220 kV 110 kV / 220 kV / 500 kV ONAN / ONAF / OFAF Radiator IEC 60076 Series, ISO 14001

Enterprise Manufacturing Strength & Quality Authority (Wisegj Power)

Jiangsu Wisegj Power Co., Ltd. (headquartered in Xinyi Plaza, Suzhou, Jiangsu) stands as a premier global manufacturer and direct exporter of utility-grade transformers, compact substations, and MV/LV switchgear ranging from 220 V to 500 kV.

TÜV Rheinland Onsite Verified Factory

Our 6,847 m² modern manufacturing facility features dedicated high-precision winding rooms, vacuum drying chambers, automated tank fabrication lines, and state-of-the-art testing bays, independently audited and verified on-site by TÜV Rheinland.

Complete International Certifications

Production operates strictly under ISO 9001 (Quality Management, Reg. 62824Q6052R0S), ISO 14001 (Environmental Management), and ISO 45001 (Occupational Health & Safety). Product series hold official CE Certificates (CE Oil-Immersed Power Transformer No. 3N230310.JYTU038; CE Dry Type No. FQC2530404; CE Compact Substation No. M.2025.206.C121884).

100% Routine Testing & Traceability

Every single step-up transformer undergoes full routine factory acceptance testing (FAT) before shipment, including Winding Resistance, Voltage Ratio & Vector Group, Short-Circuit Impedance & Load Loss, No-Load Loss & Current, Applied & Induced Voltage Withstand, and Oil Breakdown Voltage (BDV) testing.

Full OEM / ODM Customization & Engineering Support

Over 50 senior R&D electrical engineers review customer single-line diagrams (SLDs) and tenders, delivering custom vector group configurations, special tap ranges, non-standard enclosure dimensions, and multi-currency, flexible Incoterms (FOB, CIF, DDP Bucharest) within 24 hours.

Frequently Asked Questions by Bucharest & CEE Procurement Teams

1. Do Wisegj step-up transformers comply with Romanian grid requirements and EU Directives?
Yes. All transformers manufactured for European export are fully compliant with IEC 60076 standards, hold official CE certification, and meet EU EcoDesign Directive Tier 2 (EN 50588-1) loss limits. We provide complete technical documentation required by local DSOs (such as Distribuție Energie Muntenia) for grid interconnection approval in Romania.
2. What is the typical logistics transit time to Bucharest and delivery terms available?
We offer flexible Incoterms including FOB, CFR, CIF (Port of Constanța), and DDP (Delivered Duty Paid directly to your job site or warehouse in Bucharest/Ilfov). Ocean freight from our plant to Constanța Port typically takes 28 to 35 days, followed by fast customs clearance and inland truck transport to Bucharest.
3. Can you manufacture step-up transformers with non-standard input/output voltage ratios?
Absolutely. We specialize in custom-engineered voltage ratios, stepping up low output voltages (e.g., 220V, 380V, 400V, 480V, 690V, 800V) to standard distribution lines (6kV, 10kV, 15kV, 20kV, 35kV). Dual-voltage primary or secondary windings and custom tap changers (±2x2.5% or ±5%) are fully supported.
4. How do you guarantee short-circuit strength and long service life under heavy duty loads?
Our transformers utilize 99.99% high-purity oxygen-free copper conductors with high-density pressboard insulation. Core structures are bound using epoxy-glass banding tape and high-strength clamping frames to ensure exceptional mechanical resistance against electrodynamic short-circuit forces during grid faults.
5. What factory documentation and routine test reports accompany each order?
Each unit is shipped with a comprehensive quality dossier in English, containing: Certified General Arrangement (GA) Drawing, Wiring Diagram, Nameplate Reproduction, ISO 9001/CE Certificates, and Individual Serial-Number Routine Test Report (covering ratio, resistance, loss, impedance, insulation resistance, and dielectric dielectric strength). Third-party witness inspections (SGS, TÜV, Intertek) are welcome upon request.

Request a Custom Step-Up Transformer Quotation for Bucharest

Send us your project single-line diagram (SLD), required voltage step-up ratio, and capacity specifications. Our application engineering team will return a technical proposal and competitive price quote within 24 hours.