Custom OEM Oil Filled Power Transformer Manufacturer & Exporters Serving the Chișinău Market

Utility-grade S11/S13/S22 oil-immersed distribution & power transformers (10kV to 35kV / 0.4kV). Designed to IEC 60076 & Moldovan Premier Energy technical standards with factory-direct OEM engineering.

Heavy-Duty Grid Equipment

Featured OEM Oil-Immersed Power & Distribution Transformers

Engineered by Jiangsu Wisegj Power Co., Ltd. for utility substations, industrial parks, and renewable power projects across Chișinău and Central Moldova.

S11 Three Phase Oil Transformer for Power Distribution 10kV - 35kV

Three Phase S11 Oil Transformer for Electric Power Distribution

  • Capacity Range: 10 kVA - 50,000 kVA
  • Voltage Rating: 10kV / 15kV / 20kV / 35kV
  • Vector Group: Dyn11 / Yyn0
  • Certification: CE / ISO / TÜV
View Technical Specs
American Standard 3000kVA Oil Type Pad Mounted Transformer 34.5kV Class

American Standard 3000kVA 34.5kV Oil Type Pad Mounted Transformer

  • Capacity Range: 500 kVA - 3,000 kVA
  • Input Voltage: 34.5kV / 10kV Dual
  • Output Voltage: 480V / 380V / 440V
  • Standard Compliance: ANSI / IEEE C57
View Technical Specs
Industrial Oil Immersed Power Supply Transformer Industrial Grade

10kV-35kV Oil Immersed Transformer for Industrial Power Supply

  • Capacity Range: 50 kVA - 500 kVA
  • Cooling Type: ONAN / ONAF
  • Core Design: CRGO Stacked Core
  • Winding Material: Electrolytic Copper
View Technical Specs
35kV 1000kVA Solar PV Oil Immersed Transformer Solar & Wind

35kV 1000kVA 1MW Solar PV Transformers Oil Immersed for Renewables

  • Rated Power: 1000 kVA (1 MW Step-up)
  • HV Rating: 35 kV (6kV / 10kV Options)
  • Enclosure Rating: IP55 Outdoor Hermetic
  • Fluid Type: Mineral / Synthetic Ester
View Technical Specs
S11 Three Phase 10kV Distribution Transformer Eco Loss Series

S11 Three Phase 10kV/35kV 500kVA 22kV/0.4kV Oil Immersed Transformer

  • Capacity: 500 kVA
  • Voltage Ratio: 22kV / 10kV to 0.4kV
  • No-Load Loss Reduction: -30% vs GOST Standard
  • Frequency: 50 Hz / 60 Hz
View Technical Specs
750kVA Loop Feed Pad Mounted Distribution Transformer Loop Feed Pad

750kVA 10-35kV 3 Phase Loop Feed Pad Mounted Distribution Transformer

  • Capacity: 750 kVA
  • Feed Configuration: Loop Feed Dead-Front
  • Bushings: High-Voltage Loadbreak
  • Protection: Bay-O-Net & Backup Fuse
View Technical Specs
S11 10kV 20kV 35kV Distribution System Transformer Corrugated Tank

S11 10kV-35kV 50kVA-500kVA Oil Immersed Distribution Transformer

  • Capacity Range: 50 kVA - 500 kVA
  • Tank Structure: Hermetically Sealed Fin
  • Tap Range: ±2x2.5% Off-Circuit
  • Short Circuit Test: Passed IEC 60076-5
View Technical Specs
33kV Oil Immersed High Voltage Power Transformer Substation Class

IEEE / IEC Standard 33kV Oil Immersed Three Phase High Voltage Power Transformer

  • Voltage Rating: 33kV / 35kV Substation
  • Cooling Options: ONAN / ONAF Forced Air
  • Tap Changer: On-Load Tap Changer (OLTC)
  • Dielectric Strength: >60 kV Oil Breakdown
View Technical Specs
20+
Years Power Transformer Engineering Experience
500 kV
Maximum Voltage Class Manufacturing Capability
6,847 m²
TÜV Rheinland Inspected Clean Production Floor
100%
Routine Dielectric & Loss Factory Tested
Engineering Technical Whitepaper

Optimizing Electrical Grid Assets in Chișinău: Technical Requirements for OEM Oil-Filled Transformers

The municipal power grid of Chișinău—the political, economic, and industrial heart of the Republic of Moldova—is undergoing a profound structural transition. Driven by alignment with European Union energy frameworks, integration into the ENTSO-E power system via Romanian interconnections, and the aggressive expansion of renewable energy assets across Central Moldova, grid reliability requirements have elevated significantly. Municipal distribution network operators such as Premier Energy Distribution and regional transmission utility Moldelectrica are replacing aging Soviet-era GOST-standard substations with high-efficiency, IEC 60076-compliant liquid-immersed transformers.

Key Engineering Takeaway for Moldovan EPCs & Procurement Teams: Modernizing Chișinău's 10kV distribution grid to standard 0.4kV commercial/residential power requires custom transformer engineering. Transformers must accommodate harsh continental weather swings (-20°C winter freezing to +40°C summer peak thermal loading), deliver low no-load losses (S11/S13/S22 eco-series), and feature Dyn11 vector configurations to minimize neutral shift under unbalanced urban single-phase loads.

Technical Drivers of Transformer Selection in Chișinău & Surrounding Municipalities

Electrical infrastructure in Chișinău's major municipal districts—including Botanica, Rîșcani, Ciocana, Buiucani, and Centru—as well as peripheral industrial sectors like Stăuceni and Durlești, relies heavily on reliable medium-voltage (10kV and 35kV) stepping down to low-voltage (0.4kV 50Hz) utilization networks. Selecting custom OEM oil-filled transformers requires addressing several distinct operational stresses:

  • Voltage Regulation & Tap Range Tolerances: Feeders connected to extended suburban lines often suffer from severe voltage drop during winter heating peaks. Jiangsu Wisegj Power equips distribution transformers with 5-position or 7-position De-Energized Tap Changers (±2x2.5% or ±5%) and high-voltage On-Load Tap Changers (OLTC) for step-up utility substations.
  • Harmonic Mitigation in Industrial Zones: Manufacturing plants in PARC INDUSTRIAL "CIOCANA" and "TRACON" generate non-linear loads due to variable frequency drives (VFDs) and heavy machinery. Our transformer cores utilize high-permeability Cold-Rolled Grain-Oriented (CRGO) silicon steel with step-lap miter joints to suppress eddy currents, core noise, and harmonic heating.
  • Thermal Stability & Dielectric Insulation Fluid: Outdoor installation in Chișinău demands insulating fluids with superior breakdown voltage (>60 kV) and low pour points (-45°C). We supply high-grade inhibited mineral oil (IEC 60296 compliant) as well as eco-friendly, non-toxic synthetic and natural ester fluids for environmentally sensitive installations near the Nistru river basin.

Jiangsu Wisegj OEM Oil-Filled Transformer Technical Matrix for Moldovan Utilities

Below is an engineering comparison of customized transformer solutions manufactured by Jiangsu Wisegj Power Co., Ltd., designed specifically to meet Premier Energy and IEC grid code specifications:

Transformer Model Series Rated Capacity (kVA) Voltage Class (HV / LV) Vector Group No-Load Loss Standard Primary Application in Moldova
S11 Hermetic Series 30 kVA – 2,500 kVA 10kV, 15kV, 20kV / 0.4kV Dyn11 / Yyn0 30% Below GOST Standard Urban Chișinău residential feeder substations & public utilities.
S13 Low-Loss Eco Series 50 kVA – 3,150 kVA 10kV, 35kV / 0.4kV Dyn11 40% Below GOST / EU Tier 2 EcoDesign Energy-efficient commercial complexes & green building projects.
35kV Substation Power Series 1,000 kVA – 50,000 kVA 35kV / 10kV or 0.4kV YNd11 / Dyn11 IEC 60076-1 Compliant Regional transmission substations & heavy industrial manufacturing.
Solar PV Step-Up Series 500 kVA – 5,000 kVA 0.69kV, 0.8kV / 10kV, 35kV Dy11y11 (Dual Secondary) High-Efficiency Low Loss Utility-scale solar farms across Strășeni, Ialoveni & Central Moldova.
American / ANSI Pad Mounted 45 kVA – 3,000 kVA 10kV, 34.5kV / 480V, 380V Dyn11 / YNyn0 IEEE C57.12.34 Enclosed commercial underground distribution & data center pads.
Field Application Scenarios

Engineered for Chișinău’s Diverse Infrastructure Demands

How Jiangsu Wisegj Power’s custom OEM oil-immersed transformers power critical municipal, industrial, commercial, and renewable installations across Moldova.

Urban Grid Retrofitting in Chișinău Municipality

Replacing compact indoor Soviet brick transformer chambers with hermetically sealed S11 corrugated tank transformers (250kVA-1000kVA). Fits tight footprint constraints while eliminating maintenance overheads for municipal utility operators.

PARC INDUSTRIAL Ciocana & Tracon Heavy Power

Supplying high-overload capacity 35kV/10kV industrial power transformers equipped with Buchholz relays, magnetic oil level gauges, and pressure relief valves for continuous factory uptime and heavy motor startup stability.

Renewable Energy Solar PV Integration

Custom-built 0.8kV to 35kV step-up solar transformers designed for solar parks in Ialoveni and Strășeni districts. Features electrostatic shielding between windings to prevent DC inverter harmonics from destabilizing the 35kV grid.

Suburban Residential Feeder Expansion

Deploying low-noise 100kVA-400kVA pole-mounted and pad-mounted oil transformers in rapidly developing suburban communities including Trușeni, Stăuceni, and Durlești. Provides clean 400V/230V residential voltage stability.

District Heating & Cogeneration Auxiliaries

Auxiliary step-down transformers operating near thermal power plants (Termoelectrica CHP). Constructed with high thermal-class insulation materials capable of continuous operation in ambient temperatures up to +55°C inside plant enclosures.

Tamper-Resistant Pad Mounted Substation Pads

Enclosed, compartmented dead-front pad-mounted transformers for commercial shopping centers and municipal parks along Ștefan cel Mare Boulevard. Eliminates fencing requirements while safeguarding public safety.

Local Infrastructure Trends

Why Moldovan Utilities & Contractors Partner with Jiangsu Wisegj Power

As Moldova advances its power sector reforms under EU harmonization directives, transformer procurement criteria have shifted from pure capital cost to lifetime total cost of ownership (TCO). Electrical engineers in Chișinău prioritize operational durability, minimal oil maintenance, low active power losses, and strict short-circuit withstand capabilities.

1. Hermetically Sealed Corrugated Tank Design (Maintenance-Free Operation)

Traditional oil transformers with conservator tanks allow ambient air contact, leading to oil oxidation, moisture absorption, and dielectric degradation. Jiangsu Wisegj’s distribution transformers feature 100% hermetically sealed corrugated oil tanks. Elastic expansion and contraction of the corrugated tank fins accommodate thermal volume changes of the transformer oil. This completely isolates insulating oil from atmospheric oxygen and moisture, preventing sludge formation and eliminating oil sampling/filtering maintenance for up to 20 years.

2. Advanced Core & Winding Architecture

Our manufacturing plant utilizes high-precision automated shearing lines to cut high-grade grain-oriented silicon steel laminations (0.23mm to 0.30mm thick). Cores feature full 45-degree miter joints with step-lap stacking, significantly reducing no-load losses and excitation current. Windings are crafted using high-purity oxygen-free copper conductors insulated with high-density thermal paper, providing exceptional resistance against axial and radial electromagnetic forces during secondary grid short circuits.

3. Comprehensive Anti-Corrosion Surface Treatment for Continental Climates

Chișinău experiences severe winter road-salting and humid seasonal transitions. Transformer steel tanks undergo automatic shot-blasting, zinc-rich epoxy priming, and poly-urethane topcoat spraying. Coating thickness exceeds 120 microns, passing 1,000-hour neutral salt spray testing (ISO 12944 C4 climate category) to prevent rust and oil leakage throughout decades of outdoor operation.

Procurement Guidance

Frequently Asked Questions by Moldovan Buyers & Engineers

Key questions regarding technical compliance, customs clearance, dual voltage tapping, and testing routines for importing transformers to Chișinău.

Q1: Do Jiangsu Wisegj oil-filled transformers comply with Premier Energy Distribution and IEC 60076 standards?
Yes. All transformers exported to Moldova are fully engineered to match IEC 60076-1, 60076-2, 60076-3, and 60076-5 requirements. We supply standard Dyn11 vector groups with 10kV primary step-down to 0.4kV (400V/230V 50Hz), perfectly aligning with Premier Energy Distribution and RED Nord technical connection codes.
Q2: How do you ship heavy power transformers from Suzhou, China to Chișinău, Moldova?
We provide full logistics management under various Incoterms (CIF, CIP, DDP). Goods are shipped via containerized or flat-rack ocean freight to regional ports such as Constanța (Romania) or Giurgiulești Port (Moldova), followed by heavy-haul road transport directly to your project site or warehouse in Chișinău. All equipment features seaworthy wood packaging and impact recorders.
Q3: Can your engineering team supply custom dual-voltage primary windings (e.g., 10kV / 35kV switchable)?
Yes. For regional grid operators transitioning voltage levels, we manufacture custom dual-voltage primary transformers. Primary windings can be switched between 10kV and 35kV via an externally operable multi-position tap switch, allowing seamless future grid upgrades without replacing physical transformer assets.
Q4: What routine factory tests are conducted on each unit before shipment?
Every transformer undergoes 100% factory routine testing according to IEC 60076 in our accredited laboratory:
  • Winding resistance measurement on all tap positions
  • Voltage ratio measurement and vector group verification
  • Short-circuit impedance and load loss (Pcu) testing
  • No-load loss (P0) and no-load current measurement
  • Applied voltage and induced AC voltage withstand test
  • Transformer oil dielectric breakdown voltage (BDV) test
Certified factory test reports are provided with shipping documentation.
Q5: What protection accessories can be integrated on transformers destined for Chișinău?
We offer full component customization, including Qualitrol or MR temperature indicators with alarm/trip contacts, double-float Buchholz relays for gas collection, magnetic oil level indicators, integrated pressure relief valves (PRV), current transformers (CTs) built into bushings, and marshalling control boxes.
Q6: How does Jiangsu Wisegj handle technical documentation and customs clearance in Moldova?
We provide complete technical dossiers in English and Russian, including General Arrangement (GA) dimensional drawings, schematics, electrical nameplate proofs, declaration of CE conformity, ISO certificates, and custom HS Code documentation (8504.21 / 8504.22 / 8504.23) to ensure smooth Moldovan customs processing.
Manufacturing Credentials

Jiangsu Wisegj Power Co., Ltd. – World-Class Manufacturing Strength

Verified quality management systems, international certifications, and state-of-the-art production floorspace audited by TÜV Rheinland.

Located in Suzhou, Jiangsu Province, China, Jiangsu Wisegj Power Co., Ltd. operates modern production facilities spanning over 6,847 m² dedicated to medium- and high-voltage power equipment. With an engineering staff of over 50 senior technical specialists, the company designs, builds, and exports pad-mounted transformers, oil-immersed distribution transformers, cast resin dry-type transformers, and prefabricated compact substations from 220V up to 500kV class.

Verified International System & Product Certificates

Request a Custom Transformer Engineering Quotation for Chișinău

Need custom single-phase/three-phase oil-immersed transformers, 10kV/35kV substations, or pad-mounted distribution units built to your exact project specifications? Our engineering team responds within 24 hours with complete GA drawings, guaranteed loss calculations, and competitive factory-direct pricing.

Contact Us