CE Certified Oil Insulated Transformer Wholesaler & Wholesalers for North Macedonia

Utility-Grade 10kV / 20kV / 35kV Medium & High Voltage Power Distribution Solutions | European EN Standards Compliant

20+ Years
Transformer R&D & Manufacturing
Up to 500kV
Voltage Engineering Capacity
6,847 m²
TÜV Verified Production Base
100% Tested
Dielectric & Routine Factory Clearance
Wholesale Product Portfolio

CE Certified Oil Immersed & Pad Mounted Transformers

Engineered for high efficiency, operational safety, and full compatibility with North Macedonia’s distribution network (EVN / MEPSO specifications). Custom voltage taps and vector groups available upon request.

3 Phase Pad Mounted Pedestal Transformer Industrial Grade

C CE 50/60HZ 6KV-35KV 100KVA-630KVA 3 Phase Pad Mounted Pedestal Transformer for Industrial

  • Voltage: 6kV, 10kV, 15kV, 20kV, 35kV
  • Capacity: 100kVA - 630kVA
  • Certification: CE Marked, EN Compliant
Three Phase Pad Mounted Distribution Transformer Power Distribution

C CE 50/60HZ 10KV 20KV 35KV 300KVA-750KVA Three Phase Pad Mounted Transformer

  • Voltage: 10kV, 20kV, 35kV Primary
  • Capacity: 300kVA, 500kVA, 630kVA, 750kVA
  • Enclosure: Lockable Tamper-Resistant
S11 33KV Oil Immersed Power Transformer 33kV Substation

C CE Certification IEEE/IEC Standard 50/60HZ S11 33KV Oil Immersed Power Transformer

  • Voltage Class: 33kV / 35kV Medium Voltage
  • Design: Low-Loss S11 Architecture
  • Cooling: ONAN Natural Oil Cooling
S11 Oil Transformer High Capacity High Capacity

C CE MH&HV 50/60HZ 10KVA-50000KVA 10KV-35KV S11 Three Phase Oil Transformer

  • Capacity Range: 10kVA up to 50,000kVA
  • Voltage: 10kV, 15kV, 20kV, 35kV Grid
  • Standards: CE, IEC 60076, ISO Certified
MV HV S11 Oil Immersed 50KVA Transformer Low-Loss S11

C CE MV&HV S11 50/60HZ 10KV 20KV 35KV Three Phase Oil Immersed 50KVA Transformer

  • Rating: 50kVA Compact Distribution
  • High Efficiency: Low No-Load Losses
  • Features: Hermetically Sealed Tank
S11 10-35kV Distribution Transformer Grid Distribution

C CE S11 10KV 20KV 35KV 50KVA 100KVA 200KVA 3 Phase Electrical Oil Immersed Transformer

  • Primary: 10kV / 20kV / 35kV Stepped
  • Capacity: 50kVA, 100kVA, 200kVA
  • Core Material: Premium CRGO Steel
S11 3 Phase Oil Immersed Transformer Multi-Voltage

C CE S11 6KV-35KV 50KVA-300KVA 3 Phase Oil Immersed Transformer 33KV

  • Multi-Voltage: 6kV to 35kV Taps
  • Capacity: 50kVA - 300kVA Range
  • Protection: Pressure Relief & Buchholz
Single Phase Pad Mounted Transformer 75KVA Single Phase

CE Certified 6KV-34.5KV Multi-Voltage Oil Type Single Phase 75KVA Pad Mounted Transformer

  • Multi-Voltage: 6.3kV to 34.5kV Primary
  • Rating: 75kVA Single Phase
  • Application: Residential & Underground Feed
Strategic Market White Paper

Oil-Insulated Transformers in North Macedonia: Grid Modernization & EU Harmonization

An in-depth engineering overview for Balkan power distributors, EPC contractors, industrial plant developers, and wholesale electrical suppliers.

As the Republic of North Macedonia accelerates its alignment with the European Union energy framework, the modernization of its electrical distribution network has become a paramount priority. Managed primarily by key transmission and distribution entities such as MEPSO (Electricity Transmission System Operator) and EVN Macedonia (Electrodistribucija), North Macedonia's grid architecture relies heavily on robust, high-performance medium-voltage (MV) and high-voltage (HV) liquid-immersed transformers.

Wholesalers, electrical distributors, and engineering contractors operating within Skopje, Bitola, Kumanovo, Tetovo, and surrounding Balkan corridors face stringent technical mandates. Procurement teams require oil-insulated transformers that not only comply with local 10kV, 20kV, and 35kV primary voltage levels (stepping down to standard 400V/230V commercial/industrial LV supplies), but also conform to European EcoDesign Directive requirements (EN 60076 series) and hold valid CE Marking under Low Voltage Directive 2014/35/EU and Electromagnetic Compatibility Directive 2014/30/EU.

Key Technical Requirement for North Macedonia Wholesalers:

Transformers deployed across North Macedonia must feature low-loss silicon steel magnetic cores, optimized Dyn11 vector group configurations, hermetically sealed corrugated oil tanks, and mineral oil breakdown voltages exceeding 60kV to withstand mountain-valley thermal fluctuations (-20°C winter cold to +42°C summer heat).

1. Grid Voltage Architecture & Vector Compatibility

The North Macedonian power distribution sector operates across specific medium-voltage tiers. Traditional urban sub-networks in Skopje and Bitola frequently utilize 10kV feeders, while regional distribution hubs and modern industrial parks (such as TIDZ Skopje 1 & 2, TIDZ Štip, and TIDZ Prilep) are increasingly standardized on 20kV and 35kV primary rings.

To maintain phase synchronization, minimize harmonic distortion, and ensure stable neutral grounding under unbalanced single-phase loads, Dyn11 (Delta-Wye with neutral) vector connections are mandatory for 3-phase step-down distribution units. Our oil-filled S11, S13, and pad-mounted lines are engineered with multi-tap off-circuit tap changers (OCTC) offering ±2×2.5% or ±5% regulation, enabling local grid operators to maintain stable voltage regulation despite grid fluctuations.

2. Losses & Efficiency: EU EcoDesign Tier 2 Alignment

In accordance with North Macedonia's Strategy for Energy Development until 2040, reduction of network distribution losses is a primary objective. Oil-insulated transformers imported by local wholesalers must strictly limit both no-load loss (P0) and load loss (Pk).

By utilizing high-permeability, cold-rolled grain-oriented (CRGO) silicon steel laminations stacked with step-lap mitred joints, our CE-certified S11 and pad-mounted transformer series achieve no-load loss reductions of up to 30% compared to legacy S9 units. This significant reduction directly translates to substantial lifetime financial savings for industrial operators and utilities across North Macedonia, fulfilling both environmental objectives and ROI expectations.

Local Deployment Scenarios

Tailored Application Environments across North Macedonia

From solar power plant interconnections in Pelagonija to heavy metallurgical processing in Kavadarci, explore how our CE-certified oil transformers deliver operational stability.

1. Utility Solar PV Integration (Pelagonija & Osogovo)

With large-scale solar installations expanding rapidly in sunny regions like Oslomej, Bitola, and Kočani, our 10kV to 35kV oil-immersed step-up transformers connect inverter stations seamlessly to MEPSO's regional transmission grid, engineered to handle severe daily thermal cycling and reverse power flow.

2. Free Technological Industrial Zones (TIDZ Skopje / Štip)

Foreign direct investments in automotive manufacturing, electronics assembly, and logistics require uninterrupted power. Our tamper-resistant 3-phase pad-mounted pedestal transformers provide safe, aesthetic underground power feed solutions directly adjacent to manufacturing plants.

3. Heavy Industry & Mining (Kavadarci & Radoviš)

Mining operations and ferronickel processing plants require heavy-duty transformers capable of withstanding severe harmonic vibration, high ambient dust, and heavy surge currents. Our S11 transformers feature reinforced tanks and enhanced dielectric oil insulation.

Market Outlook 2025–2030

Trends Driving Transformer Wholesale Demand in North Macedonia

Key economic, regulatory, and infrastructural shifts shaping procurement choices for electrical wholesalers and importers.

A. EU Accession & Mandatory CE Compliance

As North Macedonia harmonizes its domestic legislation with the EU internal market rules under the Stabilisation and Association Agreement (SAA), municipal utilities and private buyers can no longer install non-certified or unverified electrical equipment. Holding comprehensive CE Certificates (Directives 2014/35/EU & 2014/30/EU) guarantees smooth customs clearance at border entry points (such as Deve Bair or Bogorodica) and eliminates project approval bottlenecks with EVN Electrodistribucija.

B. Decarbonization & Substation Retrofitting

Replacing aging Yugoslav-era transformers (manufactured in the 1970s and 1980s) is currently underway across North Macedonia's regional substations. Modern oil-insulated transformers with high breakdown voltage insulation fluid, corrugated expansion cooling fins, and automated tap-changing mechanisms are replacing old units to prevent power outages, reduce maintenance costs, and lower operational losses.

C. Rise of Underground & Compact Substation Architecture

Urban expansion in Skopje, Ohrid, and Kumanovo is driving a transition from traditional pole-mounted transformers toward ground-level pad-mounted units and prefabricated compact substations. Tamper-resistant, dead-front cabinet designs protect public safety in dense urban residential zones while providing maintenance engineers with easy front-compartment access.

D. Severe Balkan Climate Adaptation

North Macedonia experiences extreme seasonal temp variance. Transformers must operate reliably during scorching summer days (+42°C in the Vardar valley) and freezing mountain winters (-20°C in Šar Mountains). Our hermetically sealed liquid tanks prevent moisture ingress and oxidation, maintaining dielectric oil strength without thermal breakdown.

Technical Reference

Technical Specification Matrix: S11 Oil Immersed Series

Standard engineering ratings for 10kV and 20kV oil-insulated transformers customized for North Macedonia wholesale distributors.

Rated Capacity (kVA) Primary Voltage (kV) Secondary Voltage (V) Vector Group No-Load Loss P0 (W) Load Loss Pk at 75°C (W) Short-Circuit Impedance (%)
50 kVA 10 / 20 / 35 kV 400 / 230 V Dyn11 / Yyn0 130 W 870 W 4.0 %
100 kVA 10 / 20 / 35 kV 400 / 230 V Dyn11 / Yyn0 200 W 1,500 W 4.0 %
200 kVA 10 / 20 / 35 kV 400 / 230 V Dyn11 340 W 2,600 W 4.0 %
300 kVA 10 / 20 / 35 kV 400 / 230 V Dyn11 460 W 3,600 W 4.0 %
500 kVA 10 / 20 / 35 kV 400 / 230 V Dyn11 680 W 5,150 W 4.5 %
630 kVA 10 / 20 / 35 kV 400 / 230 V Dyn11 810 W 6,200 W 4.5 %
750 kVA 10 / 20 / 35 kV 400 / 230 V Dyn11 930 W 7,100 W 4.5 %
1000 kVA 10 / 20 / 35 kV 400 / 230 V Dyn11 1,150 W 10,300 W 5.0 %

* Custom secondary voltages (e.g., 690V for industrial drives or renewable inverters), specialized tap changers, and natural ester (FR3) eco-friendly fluid options available on request.

Enterprise Strength

Why Wholesalers Partner with Jiangsu Wisegj Power Co., Ltd.

Combining world-class power engineering, rigorous quality management, and dedicated international trade support.

TÜV Rheinland Verified Factory

Our 6,847 m² modern manufacturing facility in Jiangsu is independently audited and verified by TÜV Rheinland. We house state-of-the-art automated core stacking tables, vacuum drying chambers, precision copper winding machines, and an advanced electrical high-voltage test bay.

Triple ISO & CE Certification

Our quality and management systems are fully certified under ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018. All oil-immersed power transformers, dry-type transformers, and compact substations carry official CE Certificate documentation for European import compliance.

100% Pre-Shipment Testing

Every single transformer unit undergoes routine factory testing prior to dispatch, including winding resistance, voltage ratio, phase displacement vector check, load loss & impedance, no-load loss & current, applied AC voltage withstand, induced overvoltage withstand, and oil dielectric strength (BDV) tests.

Seaworthy Export Packaging & Logistics

Transformers shipped to North Macedonia are packed in heavy-duty, moisture-sealed export wooden cases equipped with shock/impact indicators and oil level gauges. Transit options include ocean freight to Thessaloniki (Greece) or Durrës (Albania) followed by bonded overland transport to Skopje.

Full OEM / ODM Customization

We accommodate custom utility specifications, including dual-voltage primary windings (e.g., 10kV / 20kV switchable), specialized neutral grounding bushings, Buchholz relays with alarm/trip contacts, magnetic oil level gauges, and custom enclosure painting for harsh outdoor environments.

Dedicated Engineering Support

Our team of 50+ technical engineers provides pre-sale design review, single-line diagram (SLD) evaluation, complete GA dimension drawings, nameplate approval drafts, and 24-hour rapid technical assistance for project tenders across the Western Balkans.

Wholesale Procurement FAQ

Frequently Asked Questions for North Macedonia Buyers

Addressing common technical, legal, customs, and logistical questions raised by Balkan electrical distributors and importers.

Are your CE-certified transformers accepted by EVN Electrodistribucija in North Macedonia?
Yes. Our transformers are engineered strictly according to EN 60076 / IEC 60076 international standards and hold valid CE Certificates issued by accredited notified bodies. Prior to order finalization, our engineering team provides complete technical datasheets, general arrangement (GA) drawings, and factory routine test reports for submission and preliminary approval with local grid authorities such as EVN Macedonia.
What primary voltage configurations do you offer for the North Macedonian grid?
We manufacture transformers matching North Macedonia's standard distribution voltages: 10kV, 20kV, and 35kV medium-voltage ratings, stepping down to standard 400V/230V three-phase four-wire secondary supplies. Dual-primary switchable voltage configurations (e.g., 10kV and 20kV in a single unit via off-circuit tap changer) are also widely requested by local wholesalers to simplify inventory management.
How are customs clearance and import duties handled for shipments to North Macedonia?
We offer flexible trade terms including FOB, CFR, CIF, CIP, and DDP (Delivered Duty Paid). Under CIF or CIP terms to Skopje, we manage all export packing, shipping documents (Commercial Invoice, Packing List, Bill of Lading, Certificate of Origin, and CE Conformity Declarations). Importers in North Macedonia can utilize standard customs clearance procedures through Thessaloniki Port (Greece) or directly at Skopje inland customs terminals.
What factory routine and type tests are performed on liquid-insulated transformers?
Every transformer produced in our facility undergoes 100% routine testing according to IEC 60076-1:
  • Measurement of winding resistance
  • Measurement of voltage ratio and phase displacement (vector group)
  • Measurement of short-circuit impedance and load loss
  • Measurement of no-load loss and no-load current
  • Applied power-frequency voltage withstand test
  • Induced overvoltage withstand test
  • Insulation oil dielectric breakdown voltage (BDV) test
Full type test reports (temperature rise test, lightning impulse test, and acoustic sound level test) from independent laboratories are available upon request.
How do your oil transformers withstand severe outdoor climatic conditions in the Balkans?
Our oil-immersed transformers feature hermetically sealed corrugated expansion tanks that isolate the insulating oil from ambient atmospheric oxygen and moisture. This prevents oil degradation and sludge formation. The steel tank surfaces undergo multi-stage shot blasting, anti-corrosion primer coating, and weather-resistant polyurethane topcoat painting capable of enduring UV exposure, heavy snowfall, and temperature fluctuations ranging from -25°C to +50°C.
What is the typical manufacturing lead time for wholesale orders?
Standard distribution transformers (50kVA to 1250kVA) typically have a production lead time of 20 to 30 calendar days following drawing approval. High-capacity power transformers or customized pad-mounted substation units require approximately 35 to 45 days. Rapid expedited production schedules are available for emergency grid replacement projects in North Macedonia.

Request a Wholesale Quote or Custom Design Proposal

Partner with a trusted, TÜV-verified manufacturer. Send us your project technical specifications, single-line diagrams, or target kVA/kV parameters, and our engineering team will provide a competitive wholesale proposal within 24 hours.