Factory-direct supply for port-led industrial growth

Top Trusted Industrial Transformer Manufacturer & Wholesalers in Hai Phong

CE-certified oil-immersed, pad-mounted, single-phase and distribution transformers for Dinh Vu–Cat Hai, Deep C, VSIP, Trang Due and Lach Huyen logistics projects — engineered to IEC and ANSI/IEEE requirements, with wholesale support for EPCs, contractors and distributors.

Wholesale product range

8 Industrial Transformer Products for Hai Phong Projects

This product selection is built for buyers who need factory-direct transformers and wholesale supply rather than an anonymous listing. Every product URL below is preserved from the original range. Before ordering, confirm voltage, frequency, vector group, impedance, loss limits, ambient conditions and coastal-corrosion requirements with Wisegj engineering.

Industrial supplyC CE 10KV 20KV 35KV 50KVA to 500KVA electric oil immersed transformer for industrial power supply

C CE 10KV 20KV 35KV 50KVA 100KVA 200KVA 300KVA 400KVA 500KVA Electric Oil Immersed Transformer for Industrial Power Supply

A practical 50–500 kVA oil-immersed workhorse for 10–35 kV industrial substations, plant distribution and 22/0.4 kV or 35/0.4 kV load centres in Dinh Vu, Nam Cau Kien or VSIP. Request sealed-tank, low-loss and C5-M coating options for humid coastal sites.

22/35 kVLow-lossCE
View product details
ANSI / pad mountedAmerican standard C certified 3000kVA 34.5kV oil type pad mounted transformer

American Standard /C Certified 3000kva 34.5kv/480v Oil Type Pad Mounted Transformer 60 Hz 10kv Input 380v 440v Output

For packages that specify ANSI-style pad-mounted equipment, 34.5 kV/480 V and 60 Hz. For Vietnamese 50 Hz projects, confirm a compatible winding and voltage design; 10 kV input with 380 V or 440 V output variants can be quoted for industrial and logistics facilities.

3000 kVA34.5 kV60 Hz / 50 Hz review
View product details
Single phaseC certification 6kV to 34.5kV oil type single phase 75kVA pad mounted transformer

/C Certification 6KV 10KV 13KV 20KV 34.5KV 50/60HZ Oil Type Single Phase 75KVA Pad Mounted Transformers

Suited to residential subdivisions, street lighting, auxiliary power and small commercial loads where a single-phase pad-mounted unit is easier to site than a three-phase station. Specify secondary voltage carefully for Vietnam’s local distribution practice.

75 kVA6–34.5 kV50/60 Hz
View product details
S11 distributionC CE S11 10kV 20kV 35kV three phase oil immersed distribution transformer

C CE 50/60HZ S11 10KV 20KV 35KV 50KVA 100KVA 200KVA 3 Phase Electrical Oil Immersed Transformer for Distribution System

A proven distribution choice for 50–200 kVA factory and commercial loads. S11 low-loss core construction helps control no-load losses in continuously energised industrial parks, workshops and warehouse campuses where lifecycle cost matters.

50–200 kVA3 phaseLow no-load loss
View product details
MV / HV pad mountedListed C CE MV HV three phase pad mounted transformer for industrial power supply

Listed C CE MV&HV 50/60HZ 6KV 10KV 15KV 20KV 35KV 3 Phase Pad Mounted Transformer Electrical for Industrial Power Supply

For underground commercial distribution, clean manufacturing campuses and projects needing a tamper-resistant pad-mounted interface at 6–35 kV. Loop-feed or radial-feed configuration, enclosure finish and cable termination details should be fixed at drawing approval.

6–35 kVLoop / radialTamper-resistant
View product details
Industrial componentMAIN ROLLER D industrial roller component

MAIN ROLLER D

MAIN ROLLER D is an industrial component item in the same supply catalogue, not a transformer. It is included for plant maintenance and material-handling buyers who source multiple categories through one export channel. Send drawings, load data or sample dimensions for a fit-for-purpose quotation.

Industrial componentDrawing-based quoteConsolidated export
View product details
Power generationC CE three phase oil type pad mounted transformer for power generation

C CE 50/60HZ 10KV 20KV 35KV 75KVA 100KVA 200KVA 300KVA 400KVA 3 Phase Oil Type Pad Mounted Transformer for Power Generation

Designed for power-generation packages, backup generation, CHP and renewable interconnections requiring 75–400 kVA pad-mounted oil-type transformation close to the point of use. Confirm generator short-circuit behaviour, protection coordination and neutral earthing with the project study.

75–400 kVAPower generation50/60 Hz
View product details
Main substationC CE oil immersed three phase power transformer 100kVA to 1000kVA

C CE 50/60HZ 100KVA 300KVA 500KVA 630KVA 1000KVA 10KV 20KV 35KV 3 Phase Oil Immersed Power Transformer for Power Supplies

A stronger option for larger factory main substations and 100–1000 kVA power-supply duties at 10–35 kV. Specify impedance, tapping range, cooling arrangement and loss limits to match EVN interconnection studies and future production expansion.

100–1000 kVA10–35 kVMain substation
View product details
Years of team experience in transformers
Maximum voltage class in portfolio
Verified production floorspace
R&D and technical engineers
Qualified supply-chain partners
4.9/5
Average buyer rating
Jiangsu Wisegj Power factory and engineering team supporting transformer export projects
Factory, engineering and export support from Jiangsu Wisegj Power Co., Ltd.
E-E-A-T and transparency

A Manufacturer Hai Phong Buyers Can Audit — Not Just a Trading Website

Jiangsu Wisegj Power Co., Ltd. designs, assembles and exports medium- and high-voltage equipment from 220 V up to 500 kV, including power transformers, distribution transformers, pad-mounted transformers, dry-type transformers, compact substations, switchgear, distribution boxes and voltage stabilizers. Wisegj is not a Hai Phong retail shop; it is an overseas manufacturer and wholesale exporter that supports Hai Phong projects with factory documentation, engineering review and export logistics.

For Hai Phong procurement teams, the practical question is not “who has the shortest brochure?” but who can prove the design, the test record and the delivery route? Wisegj provides drawing approval before production, routine test reports by serial number, CE and ISO documentation, export packing and engineer response within one working day.

  • Own production base with ISO 9001, ISO 14001, ISO 45001 and CE product documentation
  • 50+ R&D and technical engineers, with more than 20 years of team transformer experience
  • OEM, ODM, design-based and sample-based customization for wholesale and project supply
  • Third-party witness inspection welcomed before shipment
  • Export packing, shock indicators and full shipping documents
  • 24-hour pre-sale and after-sale engineer response
Method note: the words “top trusted” reflect the buyer’s search intent for a reliable manufacturer and wholesaler serving Hai Phong. This page is not an independent league table; it explains the engineering, compliance and wholesale criteria used by Wisegj when supporting Hai Phong buyers.

Factory-direct wholesale

Direct engineering and production communication reduce layers between specification and quotation for EPCs and distributors.

Drawing-led customization

Rating, vector group, impedance, tapping, bushings, cooling, insulating fluid, finish and nameplate language are fixed at approval.

In-house routine testing

Winding resistance, ratio and vector group, impedance and load loss, no-load loss and current, applied and induced voltage tests.

IEC and IEEE knowledge

IEC 60076 and ANSI/IEEE C57.12 series quotation reviews, with CE product documentation for applicable lines.

Coastal-corrosion protection

C5-M coating options, hot-dip galvanized parts, stainless hardware, sealed tanks and anti-condensation measures for Hai Phong humidity.

Export logistics to Hai Phong

Seaworthy crating, shock indicators, shipping marks and Incoterms from EXW to DDP, with delivery via Lach Huyen or Dinh Vu ports.

Serial-number traceability

GA drawings, nameplate drafts, routine test reports, O&M manuals and packing lists supplied for project handover.

One-working-day engineer reply

Technical questions, drawing comments and after-sales issues receive a qualified response from the transformer team.

Local application scenarios

Where These Transformers Work in Hai Phong

Hai Phong is not a generic coastal city for electrical procurement. Salt-laden air, port logistics, dense industrial parks, typhoon exposure and mixed 22 kV/35 kV distribution practice all change the specification. The scenarios below show how the product families above are typically applied and what to clarify before quotation.

Dinh Vu–Cat Hai and Deep C industrial zones

Factories in chemical, automotive, electronics, warehousing and supporting industries usually need 22/0.4 kV or 35/0.4 kV distribution. Use S11 or 50–500 kVA oil-immersed industrial transformers for line-side substations, and move to 630–1000 kVA power transformers when the main plant load and future expansion justify it.

Lach Huyen port and logistics facilities

Container yards, cold stores, warehouses and port-service buildings need robust step-down capacity, corrosion resistance and fast spare-part response. A 3000 kVA pad-mounted or 1000 kVA oil-immersed power transformer may fit, but the enclosure finish, vibration tolerance and cable termination must be reviewed against the site layout.

VSIP Hai Phong, Trang Due and electronics plants

Electronics, EV supply-chain and precision-manufacturing projects often care about voltage stability, harmonics, future capacity and documentation discipline. Specify impedance and losses clearly, reserve spare capacity, and request a fire-safety review if the transformer room is indoors or close to occupied areas.

Urban Hai Phong and residential developments

Single-phase pad-mounted transformers are useful for residential subdivisions, street lighting, auxiliary buildings and underground loop circuits. Confirm whether the local practice requires 230/400 V equivalent secondary arrangements, bayonet fusing, loop-feed switching and a low-profile enclosure.

Food processing, cold chain and pharma

Continuous cooling and process loads punish poor loss selection and weak protection coordination. Use sealed oil-immersed units with appropriate temperature indicators, pressure relief and anti-condensation provision; clarify backup-generator operation, motor starting and future refrigeration load before finalising kVA.

Shipbuilding, steel, cement and heavy industry

Heavy-duty plants should evaluate fault level, impedance, cooling, harmonic load and maintenance access rather than selecting only by kVA. A 100–1000 kVA oil-immersed power transformer with custom tapping, enhanced cooling and documented routine tests is often the safer commercial basis.

Localized development trends

Hai Phong Grid and Industrial Trends Reshaping Transformer Demand

The buying decision for transformers in Hai Phong is moving from “lowest first price” toward lifecycle loss, corrosion resistance, documentation and delivery certainty. These trends should be written into the technical enquiry, not left to the supplier’s standard offer.

Grid reinforcement and loss evaluation

As industrial and urban load grows, buyers increasingly evaluate no-load and load losses over the asset life, not only the purchase price. A transparent loss-evaluation formula — annual energy price × no-load loss × 8,760 hours plus load-loss × loss factor — helps compare quotations fairly.

FDI in electronics, EV and automotive

New factories often require clean, stable power and room for expansion. Specify spare capacity, suitable impedance, harmonic review and a clear interface between transformer, switchgear and protection before the building layout is frozen.

Port electrification and cold-chain growth

Lach Huyen and Dinh Vu activity increases demand for corrosion-resistant pad-mounted and oil-immersed units, spare parts and fast replacement planning. Enclosure finish, cable entry, lifting provisions and shipping marks matter as much as electrical ratings.

Renewables and onsite generation

Rooftop solar, wind-supply-chain factories, CHP and backup generation require careful short-circuit and protection coordination. Transformer impedance, earthing, vector group and generator operating mode should be reviewed together by the electrical consultant.

Coastal corrosion and typhoon resilience

Hai Phong’s humidity, salt fog and storm exposure justify C5-M coating options, hot-dip galvanized hardware, stainless fasteners, sealed tanks, anti-condensation heaters where specified, and typhoon-aware anchoring and transport planning.

Digital condition awareness

Oil temperature, winding temperature, pressure relief, Buchholz protection and optional digital monitoring points improve maintainability. Sensors do not replace protection design, but they help facility teams plan oil testing, inspection and downtime.

Buyer’s selection matrix

Transformer Selection Matrix for Hai Phong Applications

Use this matrix to shortlist the right product family before requesting a formal quotation. Final selection must be confirmed by the project electrical engineer and the local utility connection agreement.

ApplicationTypical voltageCapacity guideRecommended product familyProcurement note
Factory main substation22/0.4 kV or 35/0.4 kV630–2,500 kVAOil-immersed three-phase power transformerCheck fault level, impedance, tapping, cooling and future expansion.
Production-line distribution22/0.4 kV50–500 kVAS11 or oil-immersed industrial transformerConfirm 50 Hz, vector group, loss limits and indoor/outdoor layout.
Underground industrial or commercial park6–35 kV75–3,000 kVAThree-phase pad-mounted transformerSpecify loop/radial feed, dead-front arrangement, finish and cable termination.
Residential or auxiliary load6–35 kV10–250 kVASingle-phase pad-mounted transformerConfirm local secondary voltage practice, fusing and enclosure style.
Port, logistics and cold chain10–35 kV500–3,000 kVAPad-mounted or oil-immersed power transformerReview corrosion class, vibration, spare parts and delivery schedule.
Plant maintenance componentNot applicableBy drawingMAIN ROLLER DSend sample dimensions, duty cycle and material requirements.
Oil-immersed factory distribution
High fit
Pad-mounted underground networks
High fit
Coastal port and logistics sites
Strong
Indoor fire-sensitive rooms
Review
Heavy industrial main substation
Strong
Engineering evidence

Standards, Tests and Coastal Protection That Belong in the Quotation

A white-paper-grade transformer quotation should let the buyer verify what will be built, how it will be tested and what documents will arrive with the shipment. Vague compliance statements are not enough for Hai Phong industrial projects.

Standards basis

Design and testing can be aligned to IEC 60076 or ANSI/IEEE C57.12 series depending on the destination market and project specification. CE documentation applies to applicable product lines.

Routine test record

Winding resistance, voltage ratio and vector group, impedance and load loss, no-load loss and current, applied and induced voltage withstand, plus oil dielectric strength for liquid-filled units.

Protection and monitoring

Oil temperature indicator, winding temperature indicator, pressure relief, Buchholz relay where specified, silica gel breather or sealed-tank design, and optional monitoring interfaces.

Documentation package

GA drawing, nameplate draft, routine test report by serial number, O&M manual, packing list and shipping documents. Third-party witness inspection can be arranged.

CE certificate example for oil immersed power transformer from Wisegj

Certificate numbers can be checked, not just displayed

Wisegj product documentation includes CE certificates and ISO management system certificates. For Hai Phong procurement, request the current PDF certificate, model scope and certificate number matching the exact transformer family being ordered. The production system operates under ISO 9001, ISO 14001 and ISO 45001 management frameworks, and certified products should be matched to the applicable voltage class, insulation medium and enclosure type.

Where the project requires type-test evidence, declare the standard, rating, vector group and test laboratory expectation in the enquiry. Routine tests do not automatically prove every type-test characteristic, so the test scope must be written into the purchase specification.

Controlled delivery process

From Drawing to Delivery: Five Controlled Steps

Clear stage gates reduce the risk of a transformer arriving with the wrong voltage, vector group, enclosure finish or documentation. For Hai Phong projects, shipping and customs documents should be reviewed before production release.

Specification review

Engineers check rating, voltage, frequency, vector group, impedance, altitude, ambient, site layout and corrosion class.

Drawing approval

GA drawing, nameplate, loss guarantees, termination details and packing marks are confirmed before production.

Controlled production

Core, winding, drying, tanking and finish are completed with in-process quality checkpoints and material traceability.

Routine testing

Each unit receives routine tests and a serial-number test report; third-party witness testing can be coordinated.

Packing and shipping

Export crating, shock indicators, shipping marks, documents and delivery to Lach Huyen or Dinh Vu are planned.

Information gain for procurement: evaluate lifecycle losses, not only unit price. Ask every supplier to state guaranteed no-load loss, load loss, impedance, tapping range, temperature rise basis, insulation level, IP rating and corrosion-protection class in the quotation table. This makes competing offers comparable and auditable.
Wholesale supply program

A Wholesale Supply Program for Hai Phong EPCs, Distributors and Factories

Wisegj supports project buyers who need more than one transformer model, coordinated documentation and a repeatable export channel from China to Hai Phong.

EPC project supply

Staged production, drawing coordination, factory acceptance test support, serial-number test records and export packing matched to project delivery milestones.

Distributor and OEM support

Private-label nameplates, manuals, packaging, product-color coordination and mixed-model ordering are available subject to volume, destination and production schedule.

Service and spare-parts planning

Bushings, gaskets, oil-test guidance, nameplates, manuals and remote engineering support can be planned with the original order to reduce future downtime.

Local procurement FAQ

FAQ: What Hai Phong Buyers Ask Before Ordering

These are the practical questions electrical contractors, factory owners and wholesale buyers usually raise when comparing transformer manufacturers and exporters for Hai Phong delivery.

Are you a Hai Phong-based manufacturer or an overseas factory supplier?
Jiangsu Wisegj Power Co., Ltd. is a manufacturer and wholesale exporter based in Suzhou, China, serving Hai Phong buyers. This is stated transparently so procurement teams can plan import, inspection and delivery correctly. We provide factory documentation, export packing and shipping support through Hai Phong ports; local installation responsibility should be assigned in the project contract.
Which transformer should I choose for a 22/0.4 kV factory in Dinh Vu or Deep C?
For a typical line-side or workshop substation, a 50–500 kVA oil-immersed distribution transformer is often considered; for a main factory substation, 630–1000 kVA or larger may be required after load calculation. Confirm load profile, motor starting, harmonics, future expansion, fault level, earthing and the utility connection agreement. If the transformer room is indoors or fire-sensitive, review a dry-type alternative with the electrical consultant.
Can you design for Vietnam’s 50 Hz system and 22 kV or 35 kV distribution?
Yes. Vietnam uses 50 Hz, and Hai Phong industrial projects commonly involve 22 kV or 35 kV medium-voltage distribution with 0.4 kV low-voltage utilisation. The product titles above include 50/60 Hz and multi-voltage options, but each order must state the exact primary voltage, secondary voltage, vector group, tapping range and impedance. Do not rely on a generic product title alone.
How do you protect transformers against Hai Phong humidity, salt fog and storm exposure?
Specify the corrosivity category and enclosure finish at enquiry stage. Common measures include C5-M coating options, hot-dip galvanized hardware, stainless fasteners, sealed-tank construction, anti-condensation heaters where required, protected cable entries and durable nameplates. For typhoon exposure, anchoring, transport bracing, lifting points and site drainage should be reviewed together with the civil and installation contractor.
What tests and documents are supplied before shipment?
Routine tests normally include winding resistance, voltage ratio and vector group, impedance and load loss, no-load loss and current, applied voltage and induced voltage tests, plus oil dielectric strength for liquid-filled units. Each unit receives a serial-number test report. Type-test reports, third-party witness inspection and additional project-specific tests should be requested in the purchase specification if required.
What is the typical lead time and shipping route to Hai Phong?
Indicative lead time for standard transformer configurations is often around 20–35 days after drawing approval, while customized or larger units may require 35–60 days or more depending on materials and testing. Shipment can be arranged to Lach Huyen or Dinh Vu port under FOB, CFR, CIF, DDP or other agreed Incoterms. Final lead time must be confirmed against the exact specification, quantity and production slot.
Can you supply wholesalers, EPCs or electrical contractors with OEM branding?
OEM, ODM, design-based and sample-based customization are available, including ratings, vector group, impedance, tap range, bushings, cooling method, insulating fluid, enclosure color and nameplate language. For wholesale buyers, discuss private-label nameplates, manuals, packaging and mixed-model ordering early so production and export documents can be aligned.
What payment terms, warranty and after-sales support are available?
Trade terms can include FOB, CFR, CIF, EXW, FCA, CIP, CPT and DDP, with payment methods such as T/T, L/C, D/P or D/A subject to contract review. Warranty and after-sales scope must be written into the order; typical support includes remote engineering response, documentation, spare-parts planning and inspection guidance. Wisegj targets a qualified engineer response within one working day.

Request a Hai Phong-Specific Transformer Quotation

Send your single-line diagram, transformer rating, primary and secondary voltage, frequency, vector group, impedance, loss target, indoor/outdoor layout, ambient and corrosion requirements, quantity and required delivery date. A transformer engineer will review the specification before quotation, not just return a price list.