As a verified China transformer factory and global exporter (Jiangsu Wisegj Power Co., Ltd.), we deliver utility-grade three-phase oil-immersed distribution transformers, pad-mounted switch-transformers, and medium/high-voltage step-up units specifically configured for 6kV, 10kV, 20kV, and 35kV Ukrainian urban and rural power networks. Explore our core standard models below:
Reconstructing and reinforcing the electrical infrastructure in Kyiv City and the broader Kyiv Oblast (including Bucha, Irpin, Brovary, and Boryspil) demands power equipment engineered for extreme resilience, thermal stability, and fast-track deployment. The regional distribution grid, operated under Ukrainian EN standard frameworks aligned with European Harmonization Standards (DSTU IEC 60076 series), primarily relies on 10kV and 35kV medium-voltage step-down transformers stepping down to 0.4kV (400V/230V) for municipal feeder networks and industrial complexes.
Outdoor liquid-immersed transformers targeted for Kyiv must withstand extended winter sub-zero temperatures (-30°C to -35°C), abrupt load swings caused by emergency switching, and intense short-circuit forces. Standard non-hermetic units are obsolete; modern deployments strictly require hermetically sealed corrugated oil tanks (S11, S13, or S22 series) or mineral oil units equipped with nitrogen cushion gas spaces and high-grade frost-resistant synthetic rubber gaskets (HNBR/Fluororubber).
Rapid replacement of damaged 10/0.4kV transformer substations (KTP) across municipal utilities. Our S11 and S13 oil-immersed transformers feature compact foot-prints, Dyn11 vector group configuration, and top-mounted HV/LV bushings for swift drop-in retrofits.
Industrial parks along the Kyiv-Zhytomyr and Kyiv-Chernihiv freight corridors rely on heavy-duty 35kV step-down transformers (1000kVA to 2500kVA) featuring low no-load loss, high overload resistance, and ONAN cooling to guarantee uninterrupted factory operations.
Solar PV plants and distributed generation projects in Kyiv Oblast require 0.4kV/10kV or 0.4kV/35kV step-up pad-mounted oil transformers. Designed for harmonic mitigation, thermal-class 105°C insulation, and ester-oil option (FR3) for elevated fire safety.
The Kyiv grid modernizing roadmap emphasizes three major technological transitions: Loss Reduction (EcoDesign Compliance), Enhanced Short-Circuit Mechanical Rigidity, and Underground Dead-Front Safety Integration.
Energy efficiency is paramount due to rising electricity generation costs in Eastern Europe. Jiangsu Wisegj Power utilizes high-permeability cold-rolled grain-oriented (CRGO) silicon steel (such as 23ZH085 or 27ZH100) and optional amorphous alloy core architectures. The S13 and S22 oil-immersed series achieve up to 30% lower no-load losses and 25% lower load losses compared to traditional S9 series units, meeting the EU EN 50588-1 / EcoDesign tier requirements adopted by Ukrainian power authorities.
Winter operations in Kyiv demand specialized transformer mineral oil conforming to IEC 60296 (Class I or Class II) with pour points lower than -45°C and breakdown voltage exceeding 50kV after treatment. Enclosure surfaces undergo shot blasting to SA 2.5 cleanliness followed by a multi-layer epoxy primer and polyurethane finish coating (minimum dry film thickness > 120 μm), providing 1,500+ hours of salt spray resistance to endure winter road de-icing agents and atmospheric humidity.
Frequent grid fault clearing places severe mechanical stress on transformer windings. Our factory employs high-density thermal-stabilized pressboard, axial pre-compression clamping structures, and high-purity oxygen-free copper conductors (Cu-ETP). Every design calculation is verified for short-circuit electromagnetic forces, preventing radial buckling or axial tilting during external dead short circuits.
| Technical Parameter | Wisegj S11 Outdoor Oil Series | Wisegj S13/S22 Low-Loss Series | ANSI/IEEE Pad-Mounted Series |
|---|---|---|---|
| Primary Rated Voltage | 6 kV / 10 kV / 15 kV / 20 kV / 35 kV | 10 kV / 35 kV (Customizable) | 10 kV / 34.5 kV / 35 kV |
| Capacity Range | 30 kVA to 2,500 kVA | 100 kVA to 5,000 kVA | 45 kVA to 3,000 kVA |
| Vector Group | Dyn11 / Yyn0 | Dyn11 | Ynd11 / Dyn11 / Loop Feed |
| Core Material | High-Permeability CRGO Steel | Laser-Scribed CRGO / Amorphous Alloy | Stack Core CRGO Steel |
| Insulating Fluid | Uninhibited Mineral Oil (IEC 60296) | Bio-degradable Natural Ester (FR3 Option) | Mineral Oil / High-Flashpoint Synthetic Ester |
| Tank Construction | Hermetically Sealed Corrugated Tank | Corrugated Tank / Radiator Bank | Tamper-Proof Compartmental Enclosure |
| Ambient Operating Range | -35°C to +40°C | -40°C to +45°C | -30°C to +40°C |
| Standard Compliance | IEC 60076, CE, DSTU EN 60076 | IEC 60076, EU EcoDesign, CE | IEEE C57.12.34, ANSI, CE |
When procuring high-voltage electrical assets for international tenders or critical municipal recovery projects, supplier credibility and quality management systems are non-negotiable. Jiangsu Wisegj Power Co., Ltd. stands as a premier manufacturer and direct exporter of power distribution equipment, covering ratings from 220V up to 500kV.
Our 6,847 m² modern manufacturing facilities in Jiangsu, China, are independently audited and verified onsite by TÜV Rheinland. We maintain ISO 9001:2015 Quality Management, ISO 14001:2015 Environmental Management, and ISO 45001:2018 Occupational Health & Safety certifications.
All oil-immersed power transformers, pad-mounted transformers, dry-type units, and compact substations carry official CE Certificates (Certificate Nos: 3N230310.JYTU038, M.2025.206.C121882). Full type-test and routine test documentation accompanies every export unit.
With over 20 years of technical heritage, our engineering group customizes vector groups, dual-voltage primary options (e.g., 10kV/20kV switchable), special tap changers (NLTC / OLTC), and customized mounting dimensions tailored for Ukrainian installation practices.
Every single unit leaving our assembly line undergoes strict factory testing in accordance with IEC 60076 standards:
Whether you need urgent replacement transformers for municipal distribution, step-up units for a solar installation, or high-capacity power transformers, our technical sales engineers will provide detailed structural drawings, guaranteed loss figures, and FOB/DDP pricing within 24 hours.