OEM/ODM Cast Resin Dry Type Transformer Manufacturers & Exporter for the Eritrea Market

Custom-Engineered IEC 60076-11 Compliant Cast Resin Dry Type & Pad-Mounted Transformers (Up to 35kV) Tailored for Eritrean Altitude, Mining & Saline Environments

Engineering Excellence

Export-Grade Transformer Product Portfolio

Our complete range of MV/LV power distribution equipment engineered for utility grids, underground distribution, and high-altitude mining applications across Asmara, Massawa, and regional Eritrean networks.

Certified 75-2500KVA Oil Type Three-Phase Pad-Mounted Transformer

CE Certified 75-2500KVA Oil Type Three-Phase Pad-Mounted Transformer

35kV Input Voltage, 480V Output Voltage, 50/60Hz dual capability with dead-front tamper-resistant enclosure.
Explore Specifications
S11 Three Phase 10KV 35KV 500 KVA Electric Oil Immersed Transformer

S11 Three Phase 10kV-35kV 500kVA Oil Immersed Transformer

High-efficiency 22kV/0.4kV 50Hz distribution transformer featuring corrugated hermetically sealed cooling fins.
Explore Specifications
3 Phase Pad Mounted Transformer for Industrial Power Supply

MV/HV 750kVA-2500kVA 3 Phase Industrial Pad Mounted Transformer

Rugged industrial power supply unit certified for heavy continuous loads in commercial and manufacturing hubs.
Explore Specifications
ZGS11 Three Phase Pad Mounted Transformer for Power Distribution

ZGS11 75kVA-50000kVA 6kV-35kV Pad Mounted Transformer

Compact substation-style distribution unit supporting loop and radial grid feeds for municipal power networks.
Explore Specifications
American Standard 13.8KV Pad Mount Transformers for Power Generation

ANSI Standard 13.8kV 75-2500kVA Pad Mount Transformer

IEEE/ANSI C57 compliant liquid-filled step-up/step-down transformer designed for solar and diesel generation plants.
Explore Specifications
CE Industrial 3 Phase Pad Mounted Pedestal Transformer

100kVA-630kVA 6kV-35kV Pedestal Mounted Transformer

Compact pedestal transformer with dual compartment separation for high-voltage and low-voltage cable terminations.
Explore Specifications
S11 10kV-35kV Three Phase Oil Immersed Distribution Transformer

S11 50kVA-200kVA 10kV/20kV/35kV Distribution Transformer

Ultra-low loss magnetic core oil-immersed unit optimized for rural electrification and urban distribution feeders.
Explore Specifications
American Standard 3000kva 34.5kv/480v Oil Type Pad Mounted Transformer

3000kVA 34.5kV/480V Heavy-Duty Pad Mounted Transformer

High-capacity utility-grade transformer with dual primary voltage options (10kV/34.5kV) and multi-tap output.
Explore Specifications
Technical Whitepaper

OEM/ODM Cast Resin Dry Type Transformer Architecture for Critical Loads

A comprehensive technical evaluation of Epoxy Resin Vacuum Casting technology, insulation thermal endurance, and mechanical short-circuit strength for African grid infrastructure projects.

Advanced Epoxy Resin Vacuum Pressure Casting Technology

As electrical grids across East Africa undergo modernization, the demand for non-flammable, moisture-proof, and maintenance-free indoor transformers has surged. **Jiangsu Wisegj Power Co., Ltd.** engineers OEM/ODM **Cast Resin Dry Type Transformers (SCB10, SCB11, SCB13, and SCB14 series)** utilizing state-of-the-art Vacuum Pressure Impregnation (VPI) and thin-resin casting under pure quartz filler blends.

Unlike standard dry-type units, our epoxy cast resin formulations encapsulate both High Voltage (HV) and Low Voltage (LV) windings in an airtight solid dielectric matrix. This prevents moisture penetration, localized stress tracking, and chemical corrosion, ensuring an exceptionally long operational lifespan even in severe tropical or coastal industrial climates.

  • Partial Discharge Level: < 5 pC (picocoulombs) tested at 1.1 Un, guaranteeing zero micro-fissure insulation breakdown.
  • Insulation Thermal Class: Class F (155°C rise limits) standard, with optional Class H (180°C) high-temperature silica-filled encapsulation.
  • Environmental & Fire Performance Ratings: Certified C2 (Climatic), E2 (Environmental condensation), and F1 (Fire Restritive self-extinguishing) per IEC 60076-11 standards.

Structural Design Specifications

Core Construction: Cold-rolled grain-oriented (CRGO) silicon steel laminations with 45° miter joints and multi-stage step-lap joints to minimize no-load losses and noise levels (< 45-52 dB).

Winding Metallurgy: High-purity oxygen-free copper or grade-1 electrolytic aluminum foil windings, arranged in continuous disc or foil configurations to withstand elevated short-circuit electrodynamic forces.

Enclosure Protection: Custom OEM IP20, IP23 (ventilated indoor), and IP54/IP55 (weatherproof outdoor enclosures with heat exchangers or air-to-air cooling filters).

Information Gain: Why Choose Cast Resin Dry Type over Oil-Immersed Transformers?

While liquid-filled transformers excel in outdoor utility transmission, cast resin dry type transformers are mandatory for enclosed substations, high-rise buildings, underground facilities, and mining sites. They eliminate environmental oil-spill contamination, fire hazards, and the necessity for costly fire-suppression walls and catch-basins. In water-scarce or environmentally sensitive regions in Eritrea, cast resin dry type units deliver total operational safety with zero liquid sampling or gasket maintenance required.

Local Infrastructure Alignment

Engineering Solutions Tailored for Eritrea’s Operating Environment

Deploying electrical equipment in Eritrea requires overcoming extreme geographic and climatic contrasts—from high-altitude mountain plateaus to hyper-saline Red Sea coastal plains.

High-Altitude Grid

Asmara High-Altitude Derating & Dielectric Design

Asmara sits at an altitude of approximately **2,325 meters above sea level**. At elevations exceeding 1,000 meters, reduced atmospheric density decreases the air's cooling capacity and dielectric breakdown strength. Standard off-the-shelf transformers suffer thermal overheating and flashover risks under full load.

Wisegj OEM Engineering: We recalculate cooling duct surface areas and apply custom creepage clearance multipliers per IEC 60076-11 altitude correction formulas. Insulation withstand voltages are upgraded, and thermal class F/H insulation matrices ensure continuous rated output without thermal degradation.

Coastal & Saline Corridor

Massawa & Assab Marine Salt-Spray Protection

The port cities of Massawa and Assab experience ambient temperatures reaching **45°C to 50°C** combined with intense relative humidity and airborne sea-salt particulate concentration. Salt buildup on transformer surfaces leads to leakage currents, surface tracking, and rapid enclosure rusting.

Wisegj OEM Engineering: Our dry type transformers bound for coastal Eritrean sites feature hydrophobic anti-tracking epoxy coatings, stainless steel or heavy C4/C5 marine-grade powder-coated enclosures, and IP54/IP55 sealing to prevent humid salt air penetration into coil assemblies.

Mining & Heavy Industry

Bisha Mining Sector & Heavy Harmonic Loads

Eritrea's precious and base metal mining projects (such as the Bisha district) demand high-reliability electrical distribution that withstands cyclic motor starting currents, heavy harmonic distortions from Variable Frequency Drives (VFDs), and constant physical vibration.

Wisegj OEM Engineering: We custom-build dry type transformers with K-factor ratings (K-4, K-13, or K-20) to handle nonlinear harmonic overheating, reinforced mechanical core clamping to neutralize vibration, and integrated PT100 temperature SCADA monitoring.

Grid Dynamics & Market Vision

Eritrean Electric Corporation (EEC) Grid Modernization Trends

Understanding the evolving electrical infrastructure landscape, primary distribution voltage migration, and solar-hybrid expansion across East Africa.

Primary Medium Voltage Standardization (15kV / 33kV)

Eritrea’s national power distribution system operated by the Eritrean Electric Corporation (EEC) utilizes primary medium voltage distribution networks predominantly operating at 15kV and 33kV at 50Hz frequency, converting down to low voltage 400V/230V 3-phase 4-wire supply. Wisegj dry-type and pad-mounted transformers are supplied with dual HV voltage switching capabilities and off-circuit tap changers (OCTC) with ±2×2.5% or ±5% adjustment steps to compensate for significant line voltage drops over extended feeder corridors.

Solar-Diesel Hybrid Off-Grid Integration

To reduce reliance on imported heavy fuel oil (HFO) and diesel generation, regional towns and agricultural schemes in Dekemhare, Keren, and Mendefera are increasingly deploying solar PV hybrid microgrids. Wisegj provides specialized OEM dry type step-up transformers designed for inverter duty with electrostatic shielding between primary and secondary windings to mitigate high-frequency switching noise and dV/dt voltage transients.

2,325m
Max Elevation Calibration
50°C
Peak Coastal Ambient Design
< 5 pC
Ultra-Low Partial Discharge
IP55
Max Protective Enclosure
Engineering Specifications

SCB Series Cast Resin Dry Type Transformer Parameters

Key technical parameters for standard 10kV, 15kV, 22kV, and 35kV Cast Resin Dry Type Transformers exported to Eritrean utility, industrial, and commercial projects.

Series Model Rated Capacity (kVA) High Voltage (kV) Low Voltage (kV) Vector Group No-Load Loss (W) Load Loss (120°C) (W) Impedance Voltage (%)
SCB10-100/15 100 kVA 15, 13.8, 10 0.4 / 0.23 Dyn11 / Yyn0 400 W 1,570 W 4.0 %
SCB10-315/15 315 kVA 15, 13.8, 10 0.4 / 0.23 Dyn11 / Yyn0 880 W 3,470 W 4.0 %
SCB11-630/15 630 kVA 15, 13.8, 10 0.4 / 0.23 Dyn11 1,340 W 5,380 W 4.0 / 6.0 %
SCB13-1000/15 1000 kVA 15, 13.8, 10 0.4 / 0.23 Dyn11 1,700 W 7,600 W 6.0 %
SCB13-1600/35 1600 kVA 35, 33 0.4 / 0.23 Dyn11 2,850 W 11,900 W 6.0 %
SCB14-2500/35 2500 kVA 35, 33 0.4 / 0.23 Dyn11 3,600 W 16,200 W 8.0 %

* Note: Custom primary/secondary voltages (e.g., 6.3kV, 11kV, 22kV, 690V), non-standard impedance values, and forced-air cooling (AF boost capacity up to 50%) are engineered upon request under OEM/ODM terms.

Enterprise Strengths

Why Global Buyers Partner with Jiangsu Wisegj Power Co., Ltd.

A trusted manufacturer delivering certified power transformers, pad-mounted equipment, and compact substations built to rigorous international engineering standards.

Fully Certified & TÜV Rheinland Verified

Our manufacturing facility spans over **6,847 m²** of specialized assembly floorspace, verified onsite by **TÜV Rheinland**. We hold triple management certifications: **ISO 9001 (Quality), ISO 14001 (Environmental), and ISO 45001 (Health & Safety)** alongside full European CE conformity certificates for dry-type, oil-immersed, and compact substation lines.

End-to-End OEM/ODM Flexibility

Supported by a senior technical R&D team of **over 50 engineers**, we accommodate complex engineering specifications. From custom vector groups (Dyn11, Yyn0, Nd11) to dual-voltage primary windings, built-in CTs/PTs, smart temperature controllers, and specialized enclosure color codes, every unit matches project tender requirements.

Rigorous Factory Quality Inspection

100% of manufactured transformers undergo full routine testing prior to export dispatch: winding resistance, voltage ratio, vector group alignment, load & no-load loss measurement, applied overvoltage withstand, induced AC overvoltage test, and partial discharge analysis. Complete test certificates accompany every shipment.

Frequently Asked Questions

Procurement & Engineering FAQ for the Eritrea Market

Addressing key technical, logistical, and commercial inquiries from Eritrean electrical contractors, utilities, and industrial buyers.

How do you account for Asmara's 2,325m altitude when engineering dry type transformers?
At altitudes exceeding 1,000 meters above sea level, thinner air reduces thermal cooling efficiency and dielectric withstand strength. Per IEC 60076-11 standards, for transformers operating at 2,325 meters in Asmara, we increase the external clearance distances for bushings/terminations and redesign internal air cooling ducts. Additionally, temperature rise design limits are derated by approximately 0.4% per 100 meters above 1,000m, or higher thermal class F/H insulation margins are applied to guarantee 100% rated kVA output without thermal distress.
What protection measures are implemented for dry transformers installed near Massawa Port?
For coastal installations in Massawa or Assab, high atmospheric salt content and ambient temperatures reaching 50°C create severe corrosive hazards. We supply cast resin dry type transformers encapsulated in hydrophobic, anti-tracking epoxy resins. Enclosures are built with IP54 or IP55 ingress protection, constructed from heavy-gauge galvanized sheet steel or stainless steel, and treated with C4/C5 marine-grade anti-corrosion epoxy powder coating to resist salt spray and moisture tracking.
What primary medium voltages and frequencies do you support for Eritrean grids?
We manufacture equipment compatible with all Eritrean Electric Corporation (EEC) distribution voltages, including 15kV, 33kV, 11kV, 10kV, and 6.3kV systems operating at 50Hz frequency. Secondary low-voltage outputs are standardized at 400V / 230V 3-phase 4-wire systems, with custom voltages (such as 690V for industrial motor loads or mining gear) available upon request.
What documentation and testing reports are supplied with each export shipment?
Every transformer dispatched from our facility is accompanied by an official Routine Test Report per IEC 60076 series standards, including winding resistance testing, turn ratio and phase displacement checks, short-circuit impedance & load loss tests, no-load loss & current tests, and dielectric routine tests (applied and induced overvoltage tests). We also provide full General Arrangement (GA) technical drawings, schematic connection diagrams, nameplate drafts, and English Operation & Maintenance (O&M) manuals required for customs clearing and engineering handover in Eritrea.
What sea freight shipping routes and Incoterms do you offer to Eritrea?
We regularly ship to **Massawa Port** and **Assab Port** in Eritrea. We support all major international commercial terms including FOB (Shanghai/Ningbo), CFR, CIF Massawa Port, EXW, and CIP. All transformers are secured in heavy seaworthy wooden cases with internal vacuum moisture barrier packaging, desiccant packs, and shock/vibration indicators to ensure safe sea transit.
Can Wisegj dry type transformers handle harmonic distortion from VFDs and mining equipment?
Yes. For industrial facilities, processing plants, and mining sites utilizing variable frequency drives (VFDs) or non-linear power electronics, we manufacture custom OEM K-Factor rated transformers (K-4, K-13, K-20). These feature transposed foil windings, enlarged neutral conductors (200% rated), and reduced flux density cores to prevent harmonic overheating and eddy current losses.

Request an OEM/ODM Technical Quote for Eritrea Projects

Planning a power distribution project, mining expansion, or utility upgrade in Asmara, Massawa, or regional Eritrea? Connect with our senior transformer application engineers for comprehensive technical support, GA drawings, and competitive factory-direct pricing.

Send an Inquiry