Engineered to IEC 60076 & IEEE C57 standards for Slovenia's evolving 20 kV / 10 kV medium voltage grid
Slovenia’s distribution power sector is undergoing a profound structural transformation driven by the National Energy and Climate Plan (NEPN), electrification of regional transport corridors, and rapid integration of commercial solar PV arrays across Podravska, Savinjska, and Osrednjeslovenska regions. Overseen by SODO (Sistemski operater distribucijskega omrežja) and executed across the five regional distribution system operators—Elektro Ljubljana, Elektro Maribor, Elektro Celje, Elektro Gorenjska, and Elektro Primorska—the nation’s medium-voltage (MV) infrastructure is systematically transitioning from legacy 10 kV radial lines to fully undergrounded 20 kV ring-main (loop feed) topologies.
In dense urban centers like Ljubljana and Maribor, as well as industrial hubs in Novo Mesto and the logistics zone surrounding Luka Koper, spatial constraints and aesthetic mandates prevent the deployment of traditional overhead lines or sprawling fenced substations. Underground cable distribution utilizing loop feed pad mounted transformers (slovensko: samostoječe transformatorske postaje na betonskem podstavku z vzankanim napajanjem) has become the gold standard for utility engineers and industrial procurement specialists across Central Europe.
Unlike radial feed systems that terminate at a single dead-end transformer, a loop feed pad mounted transformer features dual high-voltage (HV) bushing arrangements per phase (six HV bushings total). This permits incoming primary medium-voltage power to enter the cabinet and immediately loop out to adjacent transformers in a ring-main arrangement. Should a fault occur along a specific underground cable section, regional utility operators can isolate the damaged cable segment while maintaining uninterrupted power delivery to all connected transformers via reverse-feed switching.
Jiangsu Wisegj Power Co., Ltd. engineers three-phase loop feed pad mounted transformers tailored specifically to withstand Slovenia's diverse climate conditions—ranging from humid sub-Mediterranean weather along the Istrian coast to heavy snow loads and sub-zero Alpine winters in Gorenjska.
Integrated internal liquid-immersed 4-position oil switches (Loop A, Loop B, Loop A&B connected, or Open) allow operators to reconfigure primary distribution loops manually under full load conditions without opening circuit breakers upstream.
All medium-voltage connections are completely shielded using insulated 200A loadbreak elbows or 600A deadbreak bushings compliant with IEEE 386 / EN standards. No exposed live parts remain when cabinet doors are opened, maximizing operator safety.
Features Bay-o-Net expulsion fuses in series with back-up current-limiting fuses. The Bay-o-Net fuse protects against internal secondary faults and fluid overheating, while the current-limiting fuse clears high-energy primary faults with extreme speed.
Optionally filled with biodegradable natural ester fluids (K-class dielectric liquid with flashpoint >300°C), meeting strict Slovenian environmental protection laws near ecologically sensitive Karst rivers (Sava, Drava, Soča).
Enclosures built with heavy-gauge galvanized steel, recessed padlocking assemblies, penta-head security bolts, and three-point door latching mechanisms meeting IEEE C57.12.28 tamper resistance standards for public access spaces.
Fully welded liquid-tight tanks equipped with corrugation radiators or heavy-duty external radiators, nitrogen cushions or full liquid expansion design, pressure relief valves, oil gauges, and dial-type thermometers.
Our loop feed pad mounted transformers are engineered to seamlessly operate at 50 Hz within the standard European medium voltage ratings (10 kV, 20 kV) and step down to standard low voltage levels (400V / 230V) compliant with SIST EN 60076 series and EU EcoDesign Directive EU 548/2014 & 2019/1783 Tier 2 loss guidelines.
| Technical Parameter | Standard Specification | Customizable Options for Slovenia |
|---|---|---|
| Rated Capacity (kVA) | 100, 250, 400, 630, 800, 1000, 1250, 1600, 2000, 2500 kVA | Up to 5000 kVA for major industrial & solar projects |
| Primary Voltage (MV) | 20 kV, 10 kV (50 Hz) | Dual-voltage primary (20/10 kV selectable) |
| Secondary Voltage (LV) | 400 / 230 V (3-Phase, 4-Wire) | 415 V, 480 V, 690 V (For Solar Inverter Step-up) |
| Vector Group | Dyn11, Dyn1, Yyn0 | Dyn11 (Standard for SODO networks) |
| Bushing Type & Feed | Loop Feed (6 MV Bushings, Dead-Front Elbows) | 200A Loadbreak or 600A Deadbreak Bushing Wells |
| Insulating Liquid | Mineral Oil (IEC 60296) | FR3 Natural Ester Bio-fluid (IEC 62770 / IEEE C57.147) |
| Core Material | High-permeability Grain Oriented Silicon Steel (CRGO) | Amorphous Alloy Core (Ultra-Low No-Load Loss) |
| Energy Efficiency Compliance | EU EcoDesign Directive Tier 2 (EN 50588-1) | IEEE C57.12.00 Low Loss Standards |
| Enclosure Protection & Finish | IP54 / IP55 Cabinet Protection, Galvanized Steel | C4/C5 Coastal Marine Paint Finish for Luka Koper zone |
Submit your tender specifications, single-line diagrams (SLD), or site requirements. Our senior power transformer engineers will review your project and provide a comprehensive proposal within 24 hours.
Get a QuoteWisegj loop feed pad mounted transformers are engineered to address specific infrastructure requirements across Slovenia’s key commercial, industrial, and municipal developments.
In high-density commercial corridors like BTC City Ljubljana or technology parks in Kranj, power uptime is non-negotiable. Loop feed pad mounted transformers integrated into underground cable loops allow municipal utility operators to perform maintenance or isolate line faults without interrupting power to corporate offices or mission-critical data infrastructure.
With Slovenia expanding its renewable portfolio toward 2030 decarbonization goals, major solar PV power plants in Northeastern Slovenia require robust step-up transformers (0.4kV / 0.8kV to 20kV). Wisegj loop feed units handle reverse power flow, high harmonic content from solar inverters, and offer seamless loop integration into regional 20 kV feeder lines.
Deploying electrical equipment near the Adriatic coastline requires extreme corrosion resistance. Wisegj supplies pad mounted transformers with multi-layer epoxy powder coating or stainless steel enclosures (C4/C5 marine protection), protecting internal switchgear and windings from salt spray and humidity at Luka Koper.
In tourist regions like Bled, Bohinj, and Kranjska Gora, visual aesthetics and environmental safety are paramount. Low-profile pad mounted cabinets blend discreetly into natural landscapes, while optional non-toxic FR3 natural ester oil guarantees zero soil or water toxicity in the event of an emergency leakage.
As a leading Chinese manufacturer and global exporter of high and medium-voltage power equipment, Jiangsu Wisegj Power Co., Ltd. offers unparalleled technical competence, certified quality systems, and competitive manufacturing advantages for European electrical contractors, utilities, and original equipment manufacturers (OEMs).
Our 6,847 m² modern manufacturing plant in Suzhou, Jiangsu, is independently audited and verified on-site by TÜV Rheinland. We house state-of-the-art automated core winding machines, vacuum drying ovens, liquid filling plants, and full high-voltage routine test bays.
Our operations are certified under ISO 9001 (Quality Management), ISO 14001 (Environmental Management), and ISO 45001 (Occupational Health & Safety). All pad mounted and oil-immersed transformers hold official CE conformity certificates, simplifying European customs clearance and grid connection approval.
Every single unit undergoes complete routine testing in accordance with IEC 60076 prior to dispatch: Winding resistance measurement, voltage ratio & vector group verification, short-circuit impedance & load loss, no-load loss & current, applied AC voltage withstand, induced overvoltage withstand, and dielectric fluid breakdown testing.
Technical and logistics insights for electrical engineers, EPC contractors, and utility buyers
Partner with a reliable transformer manufacturer delivering utility-grade quality, customized engineering, and strict European standard compliance for projects across Slovenia and Central Europe.
Get a Quote