CE Certified Prefabricated Substation Manufacturers & Supplier for the Dublin Market

Utility-Grade 10kV / 20kV Compact Package Substations & Transformers Engineerd for Ireland's ESB Networks & High-Density Commercial Grids

Grid-Compliant Products

CE Certified Power Distribution & Substation Equipment

Designed and factory-tested in accordance with IEC 62271-202, EN 50588-1 (EcoDesign Tier 2), and IEEE standards. Engineered specifically to withstand Dublin's humid maritime climate and meet rigorous ESB MV connection specs.

Industrial Step Up Oil Transformer 10kV 20kV 35kV IEC 60076 / CE

C CE 50/60HZ 6KV 10KV 15KV 20KV 35KV 100KVA to 500KVA Step Up Oil Transformer

  • Primary: 6kV - 35kV (50Hz)
  • Output: 220V / 400V Custom
  • Hermetically Sealed Oil Tank
Inquire Specs →
3 Phase Pad Mounted Transformer MV HV Pad Mounted

Listed C CE MV&HV 50/60HZ 6KV 10KV 20KV 35KV 3 Phase Pad Mounted Transformer

  • Capacity: 100 kVA - 2500 kVA
  • IEEE C57.12.34 / IEC
  • Tamper-Proof Enclosure
Inquire Specs →
Loop Feed Pad Mounted Transformer Loop Feed

C CE MV&HV 300KVA 500KVA 630KVA 700KVA 10KV 20KV 3 Phase Loop Feed Pad Transformer

  • Dual-Feed Loop Circuit
  • Bay-o-Net Fusing Protection
  • FR3 Bio-Fluid / Mineral Oil
Inquire Specs →
S11 Oil Immersed Distribution Transformer EcoDesign Tier 2
Pad Mounted Pedestal Transformer Pedestal Mount

C CE 50/60HZ 10KV 20KV 35KV 100KVA to 630KVA 3 Phase Pad Mounted Pedestal Transformer

  • Outdoor Ground Pad
  • Dead-Front HV Bushings
  • IP54 Weatherproof Enclosure
Inquire Specs →
Single Phase Pole Mounted Transformer Pole Mounted

ANSI Single Phase 10KV 20KV 15KVA to 100KVA Pole Mounted Industrial Transformer

  • Overhead Feeder Mounting
  • Compact Lightweight Design
  • High Dielectric Strength
Inquire Specs →
750KVA 3 Phase Pad Mounted Distribution Transformer 750 kVA Heavy Duty

C CE Certification 50/60HZ 10KV 20KV 35KV 3 Phase Loop Feed Pad 750KVA Transformer

  • Rated Power: 750 kVA
  • MV Loop / Radial Config
  • Integrated Load Break Switch
Inquire Specs →
500 KVA 22KV 10KV 0.4KV Oil Immersed Transformer Substation Standard

CE Certified S11 Three Phase 10KV 20KV 500 KVA 22KV/0.4KV 50HZ Oil Transformer

  • 50Hz Utility Frequency
  • 22kV / 10kV to 400V Step Down
  • Low Noise Operation (<52dB)
Inquire Specs →
Send an Inquiry for Technical Datasheets & Pricing
Strategic Power Infrastructure

Engineering Prefabricated Package Substations for Dublin & Ireland's Energy Transition

The Greater Dublin Area (GDA)—encompassing key technological and commercial hubs such as Grange Castle, Dublin Docklands, Blanchardstown, and Profile Park—is undergoing an unprecedented power expansion. Driven by hyperscale data center clusters, urban regeneration, EV fleet electrification, and Ireland's ambitious Renewable Electricity Support Scheme (RESS), the load density on medium voltage (MV) distribution networks has reached an all-time high. Electrical consultants, EPC contractors, and private developers operating under ESB Networks and EirGrid guidelines face stringent requirements for reliable, compact, low-loss, and CE-certified transformer substations.

Jiangsu Wisegj Power Co., Ltd. supplies high-performance, prefabricated compact package substations (CSS) and pad-mounted distribution transformers engineered specifically for the 10kV and 20kV 50Hz distribution networks common across Dublin and Leinster. Certified to EN 62271-202 (for prefabricated substations) and fully compliant with EU EcoDesign Directive Tier 2 (EN 50588-1), our turnkey power solutions eliminate the long site construction schedules and high civil labor costs associated with traditional brick-and-mortar substations.

Key Engineering Compliance for Dublin & Irish Grid Connection:

Our prefabricated substations feature fully compartmentalized MV, Transformer, and LV sections. The MV switchgear operates seamlessly at 10kV / 20kV ratings with 50Hz frequency, offering Dyn11 vector configuration, SF6-free or compact SF6 Ring Main Units (RMU), and C4-H/C5 class corrosion protection to endure Dublin's moist, marine atmospheric conditions.

6,847 m²
TÜV Verified Manufacturing Floor
Up to 500kV
High Voltage Engineering Class
Tier 2 Eco
EN 50588-1 Low-Loss Compliance
50+ Engineers
In-House R&D & Customization
Substation Architecture

Three-Compartment Modular Substation Engineering

Wisegj prefabricated substations are factory-assembled, wired, and tested prior to export, delivering true "plug-and-play" deployment for Irish site managers.

1. MV Switchgear Compartment

Equipped with 10kV / 20kV Ring Main Units (RMU) using Vacuum Circuit Breakers (VCB) or Load Break Switches (LBS). Designed with internal arc classification (IAC) for maximum operator safety, motor-driven mechanisms for SCADA remote telemetry, and voltage indicators compliant with IEC 62271-200.

2. Core Transformer Compartment

Houses either EcoDesign Tier 2 hermetically sealed liquid-immersed transformers (using biodegradable natural ester fluid or mineral oil) or cast resin dry-type transformers (Class F/H insulation). Features automatic temperature regulation, low-noise corrugated radiators, and oil conservators.

3. Low Voltage Distribution Box

Includes Air Circuit Breakers (ACB) or Molded Case Circuit Breakers (MCCB) configured for 400V 3-phase 4-wire outputs. Integrated with intelligent multimeters, reactive power compensation (capacitor banks), busbar trunking systems, and surge protection devices (SPD).

Local Application Scenarios

Tailored Substation Deployments Across Dublin & Leinster

From high-density urban environments to sensitive coastal industrial sites, our CE-marked package substations solve critical power delivery challenges.

Hyperscale & Edge Data Center Facilities

Data centers located in Dublin 15, Grange Castle, and South Dublin demand strict voltage stability, low partial discharge, and zero unplanned downtime. Wisegj pad-mounted loop-feed substations provide dual MV source switching, fast fault isolation, and low noise levels (<50 dB), making them ideal for proximity to data server halls.

Urban Regeneration & High-Rise Developments

In Dublin Docklands, Cherrywood, and city center sites where footprint is restricted and aesthetic integration is critical, our prefabricated compact substations utilize Glassfibre Reinforced Concrete (GRC) or customized architectural steel housing that blends into urban landscapes while taking up 65% less floor space than conventional substation rooms.

Solar PV & BESS Grid Interconnection

With Ireland's push toward renewable generation, utility-scale solar farms and Battery Energy Storage Systems (BESS) across County Dublin, Kildare, and Meath require robust step-up step-down package substations. Our 10kV / 20kV / 35kV step-up transformer substations ensure smooth synchronization with ESB grid nodes.

EV Hubs & Industrial Infrastructure

Commercial logistics hubs and rapid electric vehicle charging parks require heavy-duty transformers capable of handling severe harmonic currents and sudden step-load increases. Wisegj substations are designed with reinforced core clamping and harmonic-resistant windings.

Engineering Specifications

Technical Parameter Matrix: Wisegj Substation Solutions

Compare standard parameters for our European and Dublin grid-compliant compact substations and pad-mounted units.

Parameter Prefabricated Package Substation (CSS) Three-Phase Pad Mounted Transformer Cast Resin Dry-Type Substation
Rated Capacity Range 100 kVA to 3150 kVA 45 kVA to 5000 kVA 100 kVA to 2500 kVA
Rated Primary Voltage 10kV / 20kV / 35kV (50Hz) 6.3kV / 10kV / 20kV / 34.5kV 10kV / 20kV (50Hz)
Secondary Voltage 400V / 230V (Customizable) 400V / 230V or 220V 400V / 230V
Vector Group Dyn11, Yyn0 Dyn11, Dyn1 Dyn11
Applicable Standards IEC 62271-202, EN 50588-1, CE IEEE C57.12.34, IEC 60076, CE IEC 60076-11, EN 60076, CE
Enclosure IP Protection IP54 / IP65 (Compartmentalized) NEMA 3R / IP54 Tamper-Proof IP23 (Indoor) / IP54 (Outdoor)
EcoDesign Loss Level Tier 2 (EU Regulation 2019/1783) High Efficiency Low Loss Core Tier 2 (EN 50588-1 Compliant)
Corrosion Resistance Class C4-H to C5 ISO 12944 Surface Coating C4 Stainless Steel / Galvanized Powder Coated Sheet Steel / GRC
Enterprise Authority & Trust

Why Leading EPCs & Utilities Partner with Jiangsu Wisegj Power

Backed by decades of power engineering experience, ISO management systems, and third-party verified production facilities.

Third-Party TÜV Rheinland Verified

Our manufacturing base in Suzhou is independently audited onsite by TÜV Rheinland. Production capacity, advanced winding equipment, and testing facilities are fully transparent and documented.

Official CE & ISO System Certification

We maintain certified ISO 9001 Quality, ISO 14001 Environmental, and ISO 45001 Occupational Safety management systems. Certified with official CE credentials for oil transformers (No. 3N230310.JYTU038), dry transformers (No. FQC2530404), and compact substations (No. M.2025.206.C121884).

Rigorously Tested Factory Testing (FAT)

100% of manufactured units undergo routine factory acceptance testing, including winding resistance, ratio & vector verification, loss measurement, dielectric breakdown (BDV), applied voltage, induced overvoltage, and partial discharge testing.

Local Procurement FAQ

Frequently Asked Questions by Dublin Engineers & Contractors

Direct technical guidance on importing, installing, and connecting prefabricated substations in Ireland.

Do your prefabricated substations comply with ESB Networks connection guidelines in Ireland?
Yes. Our engineering team customizes MV switchgear configurations, transformer voltage taps, vector groups (typically Dyn11), and protection relays to match ESB Networks MV connection specifications for 10kV and 20kV distribution systems across Dublin and Leinster.
How do your transformers align with EU EcoDesign Directive Tier 2 requirements?
All our liquid-immersed and dry-type transformers exported to EU markets strictly comply with EU Regulation 2019/1783 (EcoDesign Tier 2) and EN 50588-1 standards. By utilizing high-grade Cold-Rolled Grain-Oriented (CRGO) silicon steel cores and optimized winding structures, we achieve ultra-low load losses ($P_k$) and no-load losses ($P_0$), reducing operational carbon footprint and energy overhead.
What enclosure materials are recommended for coastal weather in Greater Dublin?
Due to Dublin's maritime climate and high atmospheric moisture, we recommend hot-dip galvanized steel enclosures painted with C4-H or C5 class anti-corrosion coatings (ISO 12944) or pre-cast Glassfibre Reinforced Concrete (GRC) housings. GRC offers superior thermal insulation, sound attenuation, and maintenance-free weather resistance against salt spray and driving rain.
What is the typical lead time for a custom prefabricated package substation delivered to Dublin Port?
Standard manufacturing time for custom prefabricated substations ranges from 4 to 6 weeks following drawing approval. Shipping to Dublin Port via direct ocean freight typically takes 28 to 35 days. We handle all seaworthy export packing, moisture absorption barriers, and impact indicators.
Can you supply biodegradable natural ester (FR3) fluid instead of mineral oil?
Yes. For urban installations, commercial developments, or environmentally sensitive sites near Dublin's waterways, we offer transformers filled with natural ester bio-fluid (such as Cargill FR3). Natural ester offers a high flash point (>300°C), self-extinguishing fire protection, and 100% biodegradability.
What factory acceptance documentation is provided prior to dispatch?
Each unit ships with a complete Factory Acceptance Test (FAT) dossier in English, including certified routine test reports, General Arrangement (GA) dimensional drawings, schematic wiring diagrams, nameplate proofs, CE certificates, and comprehensive Operation & Maintenance (O&M) manuals.

Need a CE Certified Substation Specification Review for Dublin?

Our power system engineering team is ready to analyze your single-line diagrams (SLD), calculate loss evaluations, and provide a competitive FOB / CIF Dublin quotation within 24 hours.

Send an Inquiry