Explore our certified portfolio of oil-immersed, dry-type, and pad-mounted transformers engineered to standard MV grid levels (30kV, 20kV, 10kV) with high temperature withstand ratings.
The Tunisian power distribution landscape is managed primarily under the regulatory and operational umbrella of the Société Tunisienne de l'Electricité et du Gaz (STEG). For electrical equipment importers, EPC contractors, and industrial operators in Tunisia, specifying power supply transformers requires strict adherence to local grid parameters, environmental conditions, and international standards such as IEC 60076 and IEEE C57.
Tunisia’s medium voltage (MV) distribution backbone relies heavily on 30 kV three-phase systems, with secondary sub-distribution operating at 10 kV, 15 kV, and 20 kV depending on urban density and industrial sector distribution. Low voltage (LV) stepped-down power operates universally at 400V three-phase / 230V single-phase at 50 Hz. When sourcing power transformers for Tunisian projects—ranging from industrial zones in Sfax, Bizerte, and Nabeul to solar installations under the Plan Solaire Tunisien (PST)—custom thermal and electrical engineering is essential.
Technical Insight for Tunisian Grids: Standard off-the-shelf transformers rated for 40°C European ambient temperatures frequently experience premature insulation degradation, Buchholz relay tripping, and accelerated oil oxidation under Tunisian summer conditions (where Saharan ambient temperatures exceed +50°C). Wisegj Power engineers specialized 55°C/65°C thermal rise transformers utilizing ONAN/ONAF cooling configurations specifically optimized for STEG network resilience.
Furthermore, coastal industrial hubs along the Gulf of Tunis, Hammamet, and Gabès demand elevated protection against atmospheric salinity and maritime humidity. Transformers deployed within 5 km of the Mediterranean coastline must feature heavy-duty C4 or C5-M anti-corrosion polyurethane coatings, hot-dip galvanized radiator banks, and sealed stainless steel hardware to prevent structural rust and dielectric flashovers caused by airborne salt deposits.
Different economic sectors across Tunisia require distinct power transformer designs tailored to physical footprint, safety regulations, and environmental exposures:
A. Hermetically Sealed Oil-Immersed Distribution Transformers (S11 / S13 / S22 Series)
Oil-immersed transformers represent the workhorse of Tunisian distribution networks. Built with high-permeability Cold-Rolled Grain-Oriented (CRGO) silicon steel cores, hermetically sealed units eliminate contact between transformer oil and ambient atmosphere. This prevents moisture ingress and oil sludging, making them virtually maintenance-free for remote installation in agricultural zones in Cap Bon or mining regions in Gafsa. Available in capacities from 50 kVA up to 2500 kVA at 30kV primary step-down voltage.
B. Cast Resin Dry-Type Transformers (Class F & H Insulation)
For indoor commercial facilities, high-rise office towers in Grand Tunis, medical centers, and transport terminals like Enfidha-Hammamet International Airport, dry-type transformers are mandatory due to strict fire safety codes. Featuring epoxy resin vacuum casting, these transformers are self-extinguishing (Class F1), moisture-proof (Class E2), and immune to thermal shocks (Class C2). They eliminate oil spill risks and allow direct indoor placement adjacent to critical load centers, drastically reducing low-voltage cable transmission losses.
C. Compartmentalized Pad-Mounted Transformers (Loop Feed / Radial Feed)
As modern urban residential developments and utility-scale solar PV farms expand across Tataouine, Tozeur, and Kairouan, pad-mounted transformers offer an integrated solution. Housing the core, windings, multi-tap switches, bayonet fusing, and dead-front MV bushings inside a tamper-resistant, lockable outdoor enclosure, pad-mounted units eliminate the need for costly substation brick-and-mortar buildings. Rated up to 5000 kVA at 34.5kV, they interface seamlessly with underground cable networks.
D. Industrial Power Transformers with On-Load Tap Changers (OLTC)
Heavy industrial installations—such as phosphate processing plants, cement manufacturing, steel works, and chemical processing in Gabès—experience heavy voltage fluctuations due to dynamic grid loads. Wisegj industrial power transformers (up to 500 kV class, 10MVA to 100MVA) equipped with automated On-Load Tap Changers (OLTC) maintain stable busbar output voltages without interrupting power delivery, protecting sensitive automated production machinery.
The following engineering data table outlines standard parameters for power supply transformers customized for the Tunisian commercial and industrial market:
| Transformer Type | Rated Capacity (kVA) | Primary Voltage (kV) | Secondary Voltage (V) | Vector Group | Cooling / Fluid | Environmental Protection |
|---|---|---|---|---|---|---|
| Oil Distribution (S11) | 50 – 2,500 kVA | 30 kV / 20 kV / 10 kV | 400V / 230V | Dyn11 / Yyn0 | ONAN (Mineral Oil) | IP54, C4/C5-M Coastal Coating |
| High-Eff (S13/S22) | 100 – 3,150 kVA | 30 kV / 35 kV | 400V / 230V | Dyn11 | ONAN / Natural Ester | IP55 Hermetically Sealed |
| Cast Resin Dry-Type | 100 – 3,150 kVA | 30 kV / 15 kV / 10 kV | 400V / 230V | Dyn11 | AN / AF (Air Forced) | IP23 to IP54 Enclosure |
| 3-Phase Pad-Mounted | 75 – 5,000 kVA | 6 kV to 34.5 kV | 400V / 480V | Dyn11 / Wye-Wye | ONAN (FR3 / Oil) | IEEE C57.12.28 Tamper-Proof |
| Industrial OLTC Power | 2,500 – 25,000 kVA | 30 kV / 66 kV / 110 kV | 6.3kV / 10.5kV / 400V | Dyn11 / YNd11 | ONAN / ONAF | C5-M Heavy Industrial Grade |
| Compact Substation | 100 – 2,500 kVA | 30 kV Step-Down | 400V Integrated | Dyn11 | Combined Compartment | IEC 62271-202 Prefabricated |
As a global OEM/ODM manufacturer specializing in medium- and high-voltage power equipment (from 220V to 500kV), Jiangsu Wisegj Power Co., Ltd. brings over two decades of engineering excellence to international energy projects. Our state-of-the-art facility covers 6,847 m² of verified production floorspace, equipped with automated coil winding machinery, vacuum pressure impregnation (VPI) plants, hermetic corrugated tank fabrication lines, and modern high-voltage testing laboratories.
Certified under ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018. Product lines carry full CE compliance certificates (CE No. 3N230310.JYTU038, M.2025.206.C121882) verified on-site by TÜV Rheinland.
Our 50+ Senior R&D engineers design tailored vector groups (Dyn11, Yyn0, YNd11), special tap ranges (±2x2.5%), low-loss K-factor designs, and custom bushing geometry tailored to specific STEG tender parameters.
100% routine testing conducted prior to dispatch: winding resistance, voltage ratio, vector group verification, short-circuit impedance, no-load & load loss measurement, and dielectric oil breakdown testing.
Wisegj Power transformers are specifically built to support key economic sectors and national grid development initiatives throughout Tunisia:
1. Renewable Energy & Tunisian Solar Plan (Plan Solaire Tunisien)
Under Tunisia’s national energy transition plan to generate 30% of electricity from solar PV by 2030, large-scale solar projects in Tataouine, Tozeur, and Sid Bouzid require heavy-duty step-up transformers. Our solar-duty pad-mounted transformers (30kV / 34.5kV) are built with electrostatic shielding between primary and secondary windings, absorbing high-frequency harmonics generated by solar inverters while enduring Saharan dust storms (IP65 sealed compartments) and ambient temperatures exceeding +50°C.
2. Phosphate Mining & Heavy Chemical Processing in Gafsa & Gabès
The Gafsa Phosphate Company (CPG) and chemical refining complexes along the Gabès coastline operate in harsh environments with heavy sulfur dust, corrosive gases, and heavy cyclical motor-starting loads. Wisegj supplies cast-resin dry-type and heavy oil-immersed transformers featuring double-vacuum pressure impregnation (VPI), C5-M anti-corrosion paint finishes, and reinforced internal bracing to withstand severe vibration and electrical harmonics.
3. Seawater Desalination Plants & Maritime Port Logistics
Water scarcity projects—including the Djerba and Zarat seawater desalination facilities—and maritime port upgrades at Rades and Sfax rely on continuous 24/7 power supply. Wisegj supplies 30kV hermetically sealed distribution transformers fitted with synthetic ester insulation fluids (FR3), offering high flashpoints (>300°C), superior environmental safety for marine zones, and extended operational lifespans in saline air environments.
Contact our electrical engineering team today for technical datasheets, STEG compliance reviews, guaranteed loss calculations, and competitive factory-direct pricing within 24 hours.