Explore our full line of oil-immersed, dry-type, and pad-mounted electrical isolation and distribution transformers engineered to withstand severe voltage transients, heavy harmonic loads, and harsh tropical outdoor conditions across the Ndola commercial and industrial corridor.
High-efficiency S11 series hermetically sealed oil transformer designed for primary industrial step-down distribution.
Cast resin flame-retardant dry-type transformer for indoor mining control centers, chemical plants, and commercial complexes.
Step-up isolation transformer engineered specifically for utility-scale solar farms and commercial microgrid tie-ins.
Robust medium-voltage power distribution transformer engineered for stable 24/7 continuous operation under industrial duty.
Low-loss distribution transformer ideal for regional electrical utility networks, housing projects, and rural electrification.
Compact underground distribution single-phase pad mounted unit with dead-front construction for outdoor protection.
Heavy-duty compartmental pad mounted transformer designed for underground loop or radial feeding applications.
Reliable single-phase distribution transformer for pole-top installation, light industrial loads, and remote utility connections.
Navigating ZESCO grid dynamics, heavy inductive mining loads, and galvanic protection imperative
In heavy processing plants like Bwana Mkubwa and local smelting sites, earth potential differences between separate buildings generate stray ground currents. Our galvanic isolation transformers break unwanted ground loops and attenuate high-frequency common-mode noise by up to 60 dB, preventing control signal corruption in automated PLC systems.
Modern copper electrowinning, heavy inductive crushing, and variable frequency drive (VFD) installations generate non-linear current harmonics (3rd, 5th, 7th, 11th). Our K-Factor rated isolation transformers (K-4 to K-20) feature phase-shifted secondary configurations and extra-neutral conductor sizing to dissipate harmonic heat safely without core saturation.
The Copperbelt region experiences extremely high lightning flash densities between November and April. By integrating a Faraday electrostatic shield between the primary and secondary windings, incoming high-voltage impulse surges are diverted directly to the local earth ground before penetrating delicate downstream low-voltage equipment.
Jiangsu Wisegj Power Co., Ltd. engineers high-reliability dry-type and oil-immersed electrical isolation transformers designed to comply with international standards including IEC 60076, IEEE C57.12, and ANSI standards. Every unit delivered to the Ndola market is tailored to handle extreme ambient conditions, including high ambient temperatures, dust-laden atmospheric conditions, and altitude adjustments up to 1,300 meters above sea level across the Copperbelt plateau.
| Parameter / Feature | Dry-Type Isolation Transformer | Oil-Immersed Isolation Transformer |
|---|---|---|
| Capacity Range (kVA) | 10 kVA to 6,000 kVA (6 MVA) | 30 kVA to 31,500 kVA (31.5 MVA) |
| Voltage Classes | Primary: Up to 35 kV | Secondary: 220V - 1000V | Primary: Up to 35 kV | Secondary: 400V - 11 kV |
| Galvanic Isolation Type | Double-wound with electrostatic Faraday shield | Separated primary/secondary with solid insulation barrier |
| Winding Material | High-purity Electrolytic Copper / High-Grade Aluminum | 100% Oxygen-Free Copper Winding |
| Insulation System | Class H (180°C) or Class C (220°C) Cast Resin / NOMEX | Class A (105°C) with High-Flashpoint Mineral/Ester Oil |
| Cooling Method | AN (Air Natural) / AF (Air Forced) | ONAN (Oil Natural Air Natural) / ONAF |
| Enclosure Protection Class | IP20 (Indoor) up to IP54 / NEMA 3R (Outdoor) | Hermated Sealed Corrugated Tank / Radiator Tank (IP65) |
| Harmonic K-Factor Rating | K-1, K-4, K-13, K-20, K-30 customizable | Standard & Low-Loss CRGO core options |
Our custom-engineered electrical isolation transformers serve diverse commercial, mining, and municipal installations throughout Ndola and neighboring districts such as Kitwe, Chingola, and Luanshya.
Deep underground mining shafts and surface electro-winning plants in Bwana Mkubwa rely on 33kV/400V step-down oil isolation transformers to supply power to underground ventilation fans, heavy dewatering pumps, and leaching agitators without risk of dangerous ground voltage transfer back to primary substation switchgear.
Ndola’s lime and cement processing facilities use high-capacity K-13 rated dry-type isolation transformers to energize sophisticated automated kiln drives, baghouse dust filters, and process PLCs. The electrostatic shields block voltage transients caused by heavy motor starting currents elsewhere in the facility.
With increasing investments in solar PV plants across the Copperbelt, our 35kV MW-class solar PV step-up isolation transformers provide galvanic isolation between commercial inverter arrays and ZESCO 11kV/33kV distribution feeds, eliminating direct current (DC) signal injection into the grid.
Zambia’s energy landscape is undergoing rapid transformation driven by national energy efficiency targets, mining expansion projects, and private sector investments in renewable energy. Understanding these trends is crucial for engineering teams specifying electrical equipment in Ndola:
To combat high industrial electricity tariffs and grid transmission bottlenecks, Ndola buyers are transitioning from standard S9 transformer models to ultra-low-loss S11, S13, and amorphous metal core isolation transformers, reducing no-load core losses by up to 30%.
Industrial facilities in Ndola's Heavy Industrial Area are deploying captive rooftop and ground-mounted solar installations to maintain continuous manufacturing during load-shedding cycles. Specialized dual-secondary isolation transformers ensure seamless synchronizing between solar inverters, diesel generators, and ZESCO supply.
New commercial complexes and enclosed mining infrastructure require fire-safe cast resin dry-type transformers (Class F/H) that eliminate oil-leak hazards, auto-extinguish in fire scenarios, and produce zero toxic emissions.
Jiangsu Wisegj Power Co., Ltd. is a specialized global manufacturer and exporter of power transformers, dry-type transformers, pad-mounted transformers, and compact substations ranging from 220 V to 500 kV. Located in Suzhou, Jiangsu, China, our enterprise brings over two decades of engineering authority and manufacturing excellence to the African market.
Our production base spans 6,847 m² of specialized manufacturing floor space. Our factory layout, production machinery, staff qualifications, and quality control procedures are fully audited and verified on-site by TÜV Rheinland.
We operate under accredited management systems certified to ISO 9001 (Quality Management System), ISO 14001 (Environmental Management System), and ISO 45001 (Occupational Health & Safety Management System).
100% of manufactured isolation transformers undergo complete factory routine tests prior to export dispatch: winding resistance, voltage ratio, vector group verification, short-circuit impedance, load loss, no-load loss, and dielectric oil breakdown testing.
Expert answers regarding technical customization, transport logistics to Copperbelt Province, ZESCO grid compatibility, and warranty coverage.
Our team of senior transformer application engineers is ready to review your single-line diagrams (SLD), tender specifications, or voltage conditioning requirements. Receive a certified technical proposal, dimensional drawing, and competitive export quotation within 24 hours.