Manufacturer & Wholesaler · IEC / ANSI / CE Documentation

CE Certified Overhead Distribution Transformer Manufacturers & Wholesaler

Jiangsu Wisegj Power Co., Ltd. supplies pole-mounted, oil-immersed and pad-mounted distribution transformers from 10 kVA to 5,000+ kVA, engineered for 50/60 Hz grids and supported by CE certificates, ISO systems, routine test reports and export-ready documentation.

Product Recommendations

8 CE-Ready Overhead & Distribution Transformer Models for Wholesale Procurement

These eight transformer families cover single-phase pole-mounted overhead service, three-phase oil-immersed distribution, loop-feed pad-mounted designs and larger MV/HV industrial units. Product URLs and images are preserved from the original catalogue; ratings shown can be customized to your project standard.

S11 three-phase oil immersed distribution transformer 10 kV 20 kV 35 kV S11 · Oil Immersed

C CE 50/60HZ S11 10KV 20KV 35KV 50KVA 100KVA 200KVA 3 Phase Electrical Oil Immersed Transformer for Distribution System

Low-loss three-phase distribution transformer for overhead-to-ground feeders, industrial plants and utility networks that require routine-tested oil-immersed equipment.

  • Rating: 50–200 kVA and custom
  • Voltage: 10 / 20 / 35 kV class
  • Frequency: 50 / 60 Hz
View product
CE certification loop feed pad mounted 750 kVA transformer Loop Feed · 750 kVA

C CE Certification 50/60HZ 10KV 20KV 35KV 3 Phase Loop Feed Pad Mounted 750KVA Transformer for Electric Power Distribution

Loop-feed pad-mounted transformer for underground commercial distribution. Dead-front construction and CE documentation support projects needing service continuity and tamper resistance.

  • Rating: 750 kVA
  • Voltage: 10 / 20 / 35 kV class
  • Design: loop-feed pad-mounted
View product
ANSI single phase pole mounted distribution transformer Pole Mounted · ANSI

ANSI 50/60HZ 6KV 10KV 15KV 20KV 35KV 15KVA 25KVA 50KVA 100KVA Single Phase Pole Mounted Transformers for Industrial Power Supply

Single-phase pole-mounted transformers for overhead feeders, rural electrification, industrial power supply and 60 Hz retrofit projects.

  • Rating: 15–100 kVA
  • Voltage: 6–35 kV class
  • Mounting: pole-mounted overhead
View product
Dead front oil type pad mounted three phase transformer Dead Front · 75–2500 kVA

C Certified Oil-Type Cooper 75-2500kVA Pad Mounted Transformer 6kV-34.5kV 50/60Hz Dead Front Three Phases

Dead-front pad-mounted three-phase transformer for 6–34.5 kV distribution. Copper or aluminium windings can be specified to match loss, short-circuit and installation requirements.

  • Rating: 75–2,500 kVA
  • Voltage: 6–34.5 kV
  • Access: dead-front compartment
View product
13.8 kV oil filled three phase pad mount transformer for power generation 13.8 kV · Generation

American Standard /C Certification 75-2500KVA Oil Type Three Phase 13.8KV Pad Mount Transformers for Power Generation

Oil-type pad-mounted transformer for power generation and commercial interconnections. The 75–2,500 kVA range supports distributed generation, plant auxiliary loads and utility projects.

  • Rating: 75–2,500 kVA
  • Primary: 13.8 kV class
  • Use: generation and distribution
View product
MV HV three phase pad mounted transformer for industrial power supply MV/HV · 750–2500 kVA

C CE MV&HV 50/60HZ 750KVA 1250KVA 1500KVA 2000KVA 2500KVA 3 Phase Pad Mounted Transformer for Industrial Power Supply

MV/HV three-phase pad-mounted unit for industrial power supply, with customizable protection, cooling and accessories for high-load sites.

  • Rating: 750–2,500 kVA
  • Voltage: MV/HV class
  • Use: industrial distribution
View product
3000 kVA oil type pad mounted transformer 34.5 kV 480 V 3000 kVA · 34.5 kV

American Standard /C Certified 3000kva 34.5kv/480v Oil Type Pad Mounted Transformer 60 Hz 10kv Input 380v 440v Output

3000 kVA oil-type pad-mounted transformer for heavy industrial and large commercial distribution where voltage conversion and footprint matter.

  • Rating: 3000 kVA
  • Voltage: 34.5 kV / 480 V class
  • Frequency: 60 Hz options
View product
75 to 2500 kVA oil type three phase pad mounted transformer 35 kV · 480 V

C Certified 75-2500KVA Oil Type Three-Phase Pad-Mounted Transformer 480V Output Voltage 35KV Input Voltage 50/60HZ

Three-phase pad-mounted transformer with 35 kV input and 480 V output for projects that need CE-ready liquid-filled distribution equipment.

  • Rating: 75–2,500 kVA
  • Input: 35 kV class
  • Output: 480 V class
View product

For wholesale programs, combine pole-mounted single-phase units for overhead feeders with pad-mounted equipment for the underground section of the same network. Our engineers can review mixed-container loading, spare-part lists and documentation sets to reduce freight and commissioning cost.

Manufacturer & Wholesaler

Why the Manufacturer Behind Your Overhead Distribution Transformer Matters

For procurement teams, the phrase “CE certified overhead distribution transformer manufacturers and wholesaler” is not a marketing claim. It describes a supply chain able to deliver pole-mounted, platform-mounted and pad-mounted distribution transformers with verifiable design standards, repeatable routine test reports and documentation that survives a utility audit or customs review.

Jiangsu Wisegj Power Co., Ltd. operates from Suzhou, Jiangsu, China, and supplies the product families above from 10 kVA to 5,000+ kVA, with voltage classes up to 500 kV and 50/60 Hz configurations. The portfolio includes S11 oil-immersed distribution transformers, loop-feed pad-mounted transformers, ANSI single-phase pole-mounted transformers, dead-front pad-mounted units, 13.8 kV generation transformers, MV/HV industrial units and 3000 kVA oil-type pad-mounted transformers.

This buying guide is written for EPC contractors, utilities, MEP consultants and wholesale distributors comparing CE-certified suppliers. It explains what CE documentation does and does not cover, how to compare transformer losses and lead-time risk, which models fit typical overhead and pad-mounted applications, and what information accelerates a compliant quotation.

20+Years of transformer team experience
500 kVMaximum voltage class supplied
6,847 m²Verified production floorspace
50+R&D and technical engineers
211Qualified supply-chain partners
24 hEngineer response · 4.9/5 average buyer rating

How this guide was prepared

Prepared by the Jiangsu Wisegj Power Co., Ltd. engineering and export team. Technical statements reference IEC 60076, IEEE C57.12 series standards, ISO 9001 / ISO 14001 / ISO 45001 management systems and the CE certificate data held for the product families shown. Final performance is confirmed by approved drawings and serial-number routine test reports.

Compliance Evidence

What CE Certification Actually Demonstrates in an Overhead Distribution Transformer

CE marking is a manufacturer’s declaration that the product meets applicable European Union harmonisation legislation. For distribution transformers, credible evidence usually connects the CE declaration to the product family, drawing revision, serial number and routine test report — not just a logo on a catalogue page.

Directive and standard fit

Evidence should reference the applicable directives and the design standard used for the rating, commonly IEC 60076 for power and distribution transformers. Auxiliary equipment may bring additional EMC or safety requirements.

Routine test evidence

Ask for winding resistance, ratio and vector group, impedance and load loss, no-load loss and current, applied voltage and induced voltage tests. Liquid-filled units should also show oil dielectric strength records.

Management system backing

ISO 9001, ISO 14001 and ISO 45001 certificates show that quality, environmental and occupational health and safety controls are audited. Wisegj certificates are valid through 2027 according to the published records.

Traceability from nameplate to packing

CE documentation should match the nameplate, GA drawing, test report and packing list. For wholesalers, multi-language nameplates and document packs reduce friction at customs and project handover.

What procurement teams verify before awarding a transformer PO

Illustrative weighting based on common buyer review checklists for CE-certified distribution transformer projects; it is not a market forecast.

Certified design and test documentation95%
Guaranteed loss and impedance values90%
Factory audit or third-party inspection86%
Lead time and spare-parts route82%
Export packing and Incoterms coverage76%
Buyer’s Guide

How to Select the Right Overhead or Pad-Mounted Distribution Transformer

A simple decision matrix used with EPC contractors, utilities and wholesale distributors when shortlisting equipment. Ratings shown are typical; project-specific design can extend beyond each range.

Application RouteRecommended FamilyWhy It FitsKey Procurement Checks
Overhead residential and rural feedersANSI single-phase pole-mounted transformerLightweight pole installation, 15–100 kVA range, 6–35 kV class and 50/60 Hz options.Creepage distance, fuse and arrester coordination, pole loading, nameplate language.
Industrial and commercial overhead linesS11 three-phase oil-immersed distribution transformerLow-loss core and coil design for 10 / 20 / 35 kV systems with routine-tested performance.Guaranteed no-load and load loss, impedance, tap range, vector group.
Underground commercial distributionLoop-feed pad-mounted 750 kVA transformerDead-front access and loop-feed configuration support service continuity and tamper resistance.Loop or radial feed, bayonet fusing, compartment security, enclosure finish.
Public-safety sensitive sitesDead-front 75–2500 kVA pad-mounted transformerSeparate compartments and dead-front design reduce exposure during operation and maintenance.6–34.5 kV rating, winding material, fluid type, pressure relief and gauges.
Power generation interconnection13.8 kV oil-filled pad-mounted transformerMatched for distributed generation, plant auxiliary loads and utility interconnection projects.Impedance, cooling class, harmonic duty, protection coordination and test plan.
Heavy industrial power supplyMV/HV 750–2500 kVA pad-mounted transformerHigher capacity industrial distribution with customizable protection and accessories.Fault level, altitude, ambient temperature, enclosure access and cable termination.
Large commercial voltage conversion3000 kVA 34.5 kV / 480 V oil-type pad-mounted transformerHigh-capacity conversion for large sites where footprint and delivery schedule are critical.60 Hz verification, input/output voltage, transport weight and lifting plan.
35 kV to 480 V distribution projects75–2500 kVA oil-type three-phase pad-mounted transformerClear input/output voltage definition with CE-ready documentation for export projects.CE scope, loss capitalization, fluid, finish colour and spare-parts list.

The best selection is not always the largest unit. For overhead networks, pole strength, conductor spacing, lightning exposure and maintenance access can matter as much as kVA. For pad-mounted projects, cable termination, footprint and future capacity often determine the final design.

Product Development

Transformer Technology and Product Development Trends for the Next Grid Cycle

Overhead and pad-mounted distribution transformers are becoming more efficient, easier to monitor and more adaptable to renewable and export projects. The strongest suppliers combine proven IEC/ANSI design with documentation discipline.

Low-loss cores and amorphous options

High-grade CRGO and amorphous cores help meet stricter efficiency targets. The design choice must balance no-load loss, load loss, noise, weight and transport limits.

Dual-frequency and multi-voltage export platforms

50/60 Hz flexibility, multiple primary voltages and broad tap ranges allow one product family to serve several markets while keeping factory test routines standard.

Monitoring-ready transformer designs

Temperature, pressure, oil level, partial-discharge and RTD provisions are increasingly requested for critical units. Sensors add value only when they are integrated into the electrical and mechanical design.

Compact, modular and prefabricated systems

Pad-mounted and compact substation packages reduce site work. For overhead-to-underground transitions, modular designs help utilities standardise protection, cable termination and enclosure options.

Factory Evidence

Inside the Production and Quality System for Distribution Transformers

From core stacking to final dielectric testing, each step is controlled by documented work instructions and inspection checkpoints. The images below are sourced from the original Wisegj website and show production, testing, packing and delivery environments.

01

Specification review

Engineers check rating, standards, altitude, ambient temperature and installation method.

02

Drawing and loss approval

GA drawing, nameplate draft, guaranteed losses and test plan are confirmed before production.

03

Controlled production

Core, winding, drying, tanking and in-process QC follow documented work instructions.

04

Routine testing and packing

Each unit receives a serial-number test report, export packing and shipping documentation.

Enterprise Advantages

Why Choose Wisegj as Your CE-Certified Transformer Manufacturer and Wholesaler

Wisegj combines a verified production base, engineering review and export documentation with product-family CE certification. For wholesale buyers, the advantage is not only the transformer itself but the repeatable data package behind every shipment.

Verified factory capacity

6,847 m² of inspected production floorspace with dedicated winding, core assembly, drying, tanking and test areas, supported by 211 qualified supply-chain partners.

20+ years of engineering depth

Team experience across oil-immersed, dry-type, pole-mounted and pad-mounted transformer projects, including supply to Fortune 500 companies.

50+ technical engineers

R&D and technical support for specification review, drawings, loss optimization, protection coordination and project documentation.

ISO management systems

ISO 9001, ISO 14001 and ISO 45001 systems cover quality, environmental and occupational health and safety controls for production and export.

CE product-family certificates

Published CE records include oil-immersed power transformer No. 3N230310.JYTU038, oil immersed transformer No. M.2025.206.C121882, dry type transformer No. FQC2530404 and compact substation No. M.2025.206.C121884; exact scope is confirmed per rating.

TÜV Rheinland verified

Production capability, floorspace and quality inspection are verified onsite by TÜV Rheinland, an independent third-party inspection body.

OEM, ODM and wholesale support

Custom ratings, vector groups, taps, bushings, cooling methods, insulating fluids, enclosure colours and nameplate languages for distributors and project buyers.

24 h response and complete documentation

GA drawings, nameplate drafts, routine test reports, O&M manuals and export packing records are provided; average buyer rating is 4.9/5.

Procurement FAQ

Frequently Asked Questions About Overhead Distribution Transformer Procurement

Direct answers from the engineering and export team for buyers comparing CE-certified manufacturers and wholesalers.

Are you a manufacturer or a trading wholesaler?
Jiangsu Wisegj Power Co., Ltd. is a Suzhou-based transformer manufacturer and export wholesaler. We design, assemble and test distribution transformers, power transformers, pad-mounted units and compact substations. We support OEM, ODM, design-based and sample-based customization, as well as multi-unit wholesale programs for distributors.
What does CE certification cover for overhead distribution transformers?
CE marking is product-family and configuration specific. For a distribution transformer, the evidence should connect the CE declaration to the applicable directives, design standard, drawing revision, serial number and routine test report. Auxiliary equipment can bring additional EMC or safety requirements. Always ask for the CE Declaration of Conformity and confirm that the exact rating, voltage, fluid and accessory set falls within the certified scope.
Which ratings can be supplied for overhead and distribution projects?
The portfolio covers single-phase and three-phase distribution transformers from approximately 10 kVA to 5,000+ kVA, with voltage classes up to 500 kV and 50/60 Hz configurations. Options include pole-mounted, oil-immersed, pad-mounted, dead-front, loop-feed, dry-type and compact substation designs. If your required rating is outside a catalogue range, the engineering team can review a custom design.
How should I specify an overhead distribution transformer for quotation?
Provide rated power, primary and secondary voltage, frequency, number of phases, vector group, impedance, tap range, cooling method, insulating fluid, altitude, ambient temperature, applicable standard, loss limits, mounting method, protection accessories, nameplate language and destination port. A single-line diagram and project schedule help the engineer return a compliant design without extra clarification rounds.
Which factory tests are performed before shipment?
Every unit receives routine tests including winding resistance, voltage ratio and vector group, impedance and load loss, no-load loss and current, applied voltage and induced voltage withstand. Liquid-filled units also receive oil dielectric strength checks. Type test reports can be provided where available, and third-party witness inspection is welcome before packing.
Can you customize losses, impedance and accessories?
Yes. Customization can cover CRGO or amorphous cores, copper or aluminium windings, ONAN or ONAF cooling, mineral oil or natural ester fluid, fuse and arrester selection, pressure relief devices, temperature gauges, RTD provisions, enclosure colour and nameplate language. If you have a loss-capitalisation formula or efficiency target, send it with the enquiry so the design can be optimized against your evaluation model.
What trade terms and payment methods are accepted?
Export terms include FOB, CFR, CIF, EXW, FCA, CIP, CPT, DDP, DDU and express delivery where suitable. Payment options include T/T, L/C, D/P and D/A, subject to contract and commercial review. Major currencies such as USD, EUR, GBP, CAD and AUD can be discussed.
How do you control lead time and shipping quality for wholesale orders?
After drawing and loss approval, the factory issues a production schedule with inspection checkpoints. Routine test reports are prepared per serial number, and export packing can include seaworthy crating, shock indicators and loading photographs. Lead time is confirmed project by project because rating, fluid type, accessories, testing scope and documentation requirements all affect the production slot.
What documentation is supplied with each transformer?
Documentation typically includes the approved GA drawing, nameplate drawing, routine test report, CE Declaration of Conformity where applicable, O&M manual, packing list and certificate copies. For wholesale buyers, document packs can be prepared to support customs clearance, project handover and spare-parts planning.
Engineering Review

Send your overhead distribution transformer specification for a CE-compliant quotation

Share your kVA, primary and secondary voltage, frequency, vector group, impedance, cooling, altitude, ambient temperature, standard, loss target and delivery port. For wholesale programs, include annual volume and target markets so the proposal can cover repeat orders, spares and documentation.

  • Rated power and voltage ratio
  • Frequency and phase
  • Vector group and impedance
  • Cooling and insulating fluid
  • Applicable IEC / IEEE standard
  • Loss target and delivery port